HELP KRATON V5 Noob !

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Tony Slade

Active Member
Messages
19
Reaction score
6
Location
Cheshire
Arrma RC's
  1. Kraton 6s
  2. Typhon 6s
Just bought brand New Kraton V5 6s. I was setting the steering up using the A&B buttons on SLT3 controller. I was setting the travel to the left when all of a sudden the wheels turned hard right and the thing started bleeping. I’ve got no steering at all now 🤦‍♂️. I am a Newbie to this game. What have I done ??
 
If you got it in a store, don't do anything and take it back.
Most likely a defective servo. You can unplug and see if everything else is working.

Set your trims to zero and cycle power one more time.
Disconnect your steering servo from the receiver and see if you get throttle response. Plug your servo back in and see if your problem is coming back.
 
If you got it in a store, don't do anything and take it back.
Most likely a defective servo. You can unplug and see if everything else is working.

Set your trims to zero and cycle power one more time.
Disconnect your steering servo from the receiver and see if you get throttle response. Plug your servo back in and see if your problem is coming back.
I can get the thing to power the wheels forwards and reverse but no steering
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top