Notorious Help the rookie 🙏 - front upper arm notorious

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Junior_terrier

Fairly New Member
Messages
9
Reaction score
3
What's the name of this part to buy another one?

Thought I've broken upper arm but I was wrong , no idea how to remove this part as well

All help is appreciated

IMG_20230105_183424.jpg


IMG_20230105_183353.jpg


IMG_20230105_182906.jpg
 
Plan on a hinge pin and aluminum upper front hinge pin block unless you enjoy this procedure. You must have had one good soft and plush landing! Arm appears fine, you must've been driving for a while after the composite failed. Usually the pin bends underneath the head, can be straightened but will be a weak point.

Not sure what the site rules are on promoting products, so I'll let someone else point you to a specific brand.
 
If you check the other (right) side of the shock tower, you can actually see how its 'connected' to the shock tower so you can take it off ;)

It seems parts 723328 and 330482 are holding it there
 
https://www.arrma-rc.com/en/interactive-exploded-view?pid=ARA8611V5

Use this for a much better reference for parts. You can click on the numbers and it'll tell you how much it costs and show you the part and what not.

If you want an upgrade then you could go with one from M2c racing or Just bash it rc.
wow I didnt know this existed. I was actually thinking it would be great to have an interactive like this with links to parts and videos on how you install them etc
 
What's the name of this part to buy another one?

Thought I've broken upper arm but I was wrong , no idea how to remove this part as well

All help is appreciated

View attachment 267565

View attachment 267566

View attachment 267567
I believe you’re pointing to the ‘front upper rear hinge block’. I’m going by what your hex indicates on the other side…

Here, save this link. It’ll help you much in the future identifying parts.
https://www.arrma-rc.com/on/demandw...w6f4b5397/Manuals/ARA8611V5-Exploded_View.pdf
 
Last edited:
This could help.
Also this, they’re all over YouTube.
Man, thank you so much 👍❤️🙏
When I get home here in about an hour or so I'll dig it up I have a how to somewhere around here.

-edit- found it, don't worry about taking apart the rear of the truck just the front section as this was originally for installing the T2T brace. Post in thread 'Outcast Gen One Update Help Request' https://www.arrmaforum.com/threads/outcast-gen-one-update-help-request.52381/post-750721
Thanks a lot
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top