Typhon Help with choosing esc for typhon 3s

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Otto

Fairly New Member
Messages
19
Reaction score
15
Arrma RC's
Which esc should I choose as a replacment for stock blx 100 esc. Motors that I use SL 3665/3100kv, 3660/3200kv, 3674/3270kv all on 3s. Must support 4s in future. Max 10 sct already I have.
1. Hobbywing QUICRUN WP8BL150 BL ESC. Not sure if esc support 3s?
2. Hobbywing XERUN XR8 SCT 140A ESC.
3. Hobbywing XERUN XR8-Plus 150A 1/8th ESC
Thx
 
I put the Arrma BLX120 in mine with a 14.8v 4s battery and a 20tooth pinion. It went 62mph stock with the pinion. And tonight it went 73mph on GRP steel belted tires. It's a completely different buggy now. It's insane.
I put the Arrma BLX120 in mine with a 14.8v 4s battery and a 20tooth pinion. It went 62mph stock with the pinion. And tonight it went 73mph on GRP steel belted tires. It's a completely different buggy now. It's insane.
41406


41407
 
I have the BLX120 and 2400kv combo from a 4S along with a 24T pinion using the HR mount. I have a set of GRP S2 slicks. I just rebuilt my diffs and hope to make a speed run this weekend if weather allows. My PB is 59 but I know it has more. I just ran out of room. I need to find a good place to run.
 
The quicrun is the same esc as the blx185. I ran the 185 for a while in my granite. It is a large ESC for that platform. If you’re going to run it in the Typhon, you might do some checking to make sure the body will clear.
 
On 99% I decide for the xr8 plus esc. Thx all for help.
 
Great esc but the size.... Now i can fit max 68 long motor but Im working on new reciever box and than will be no problem fit 74 mm long motor.
IMG_20190711_220213.jpg
 
Now enough place for 74 mm long motor.
 

Attachments

  • IMG_20190718_225811.jpg
    IMG_20190718_225811.jpg
    288.6 KB · Views: 74
Mounted 3674 long motor and still is 10 mm gap between esc and motor.
 

Attachments

  • IMG_20190719_140651.jpg
    IMG_20190719_140651.jpg
    311.4 KB · Views: 81
Mounted 3674 long motor and still is 10 mm gap between esc and motor.
thats great!
Im sure a good 4074 motor will be plenty in the blx 3s but if you ever wanted a 4082, sss make some nice motors at great prices!!!


I run a 4092 motor, fits nice in the 6s.

This is the sss 4092 2140kv motor.
They make 2000kv, 2200kv and 2600kv among others in the 4082 can size
 
Last edited:
No its 3665 3100kv.
Now 4268 2350kv
 

Attachments

  • IMG_20191220_124623.jpg
    IMG_20191220_124623.jpg
    377.3 KB · Views: 76
Now enough place for 74 mm long motor.
Help! What reciever box have you got going on here? I need to change mine to fit a hobbywing 150A and my 4070 motor? It's an arrma 4x4 reciever box obviously but is the granite one different/smaller?
I see!!! You madman. You cut that offer and glued it back together!!
 
Last edited:
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top