Home-made mud/snow flaps for Typhon

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

72Z15SS

Very Active Member
Messages
670
Reaction score
891
Location
Pa.
Arrma RC's
  1. Fazon
  2. Nero
  3. Raider
With the chance of snow Sunday in my area, (some of you are already getting snow) I thought I would make some rear flaps or my Typhon. I hade this scrap plastic in my toolbox so I put it to use. I first made a cardboard template and made it fit without any clearance issues, then mad the actual things They extend into the wheel to protect the dogbones and bearings and almost to the end of the lower swingarm pivot point. Here are some pics with the chassis compressed, fully extended then with the body on. I used the existing holes in the swingarms to mount them and drilled another hole in the flaps for access to the one screw you see it the pictures.

20161210_121523.jpg
20161210_121547.jpg
20161210_121553.jpg
20161210_121625.jpg
20161210_121648.jpg
 
Thank You. Well, they'll work fine even though they're not that pretty.
I made a pair of these for my Outcast before these.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top