Typhon Hot Racing Aluminum Bellcrank

[KentuckyWindage]

Hello all,

I got the bellcrank installed, but there is 4 different holes I could put the linkage into. I can’t find anything on their website about which mounting hole is best for what and how that changes. Any ideas?

Jordan

 

[real_name_hidden]

The holes are for different lengths along with reduced slop/increase turn radius.

 

[KentuckyWindage]

The holes are for different lengths along with reduced slop/increase turn radius.

But which one is which….

 

[RCguterrez]

Without adjusting your turnbuckles, see which hole they would fit in to the easiest.

 

[KentuckyWindage]

Thanks! I went with the inside holes. Seems to have a slight toe out and looks the most “natural”. Sorry, very new to this!

 

[slick2500]

What I do is lay the Hot Racing parts on top of the old stock parts and see which holes line up the best. Integy, GPM as well as most of the eBay and Amazon parts sellers do their parts like that as well.

 

[KentuckyWindage]

Also tried that, the inside holes lined up best. Thanks!