Kraton Hot racing center diff mount for Kraton EXB

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

zizi8862

Active Member
Messages
129
Reaction score
86
Location
New Zealand
Arrma RC's
  1. Kraton EXB
  2. Outcast 4s
Hi

Was wondering if anyone has used the Hot racing aluminum center diff mount to replace the plastic one in the EXB of if there is any other ones that can be used. Im not a fan of the plastic center diff mount.

hraaon38a01.jpg
 
I'd just buck up an go with the pps mount..HR one is 40$,then 20$ for spur mount an 20$ for top peice.80$ total..
Pps is so much better for a little more $$$

Agreed. I am amazed at how awesome the PPS mount is everytime I have to adjust the mesh on my Kraton.

The stock mount is fine, but if you want to upgrade, PPS is the way to go. I don't think I've ever heard anybody regretting buying the PPS mount.

I bought mine soon after it came out. I suspected I was possibly buying some kind or RC jewellery that would also happen to be functionally superior, if the hype turned out to be true. It turns out it is a significantly better performing part that also happens to be beautiful.
 
To be fair that crash would obliterate almost everything. Holy crap!
75mph strait into a 10in tall curb.good way to throw 1000ish$ down the toilet.
To be fair that crash would obliterate almost everything. Holy crap!
Im Most proud of this achievement award than many others I've gotten in my lifetime....lol
Heres another ruined hr mount.hit this poll above 130mph.can see the screws from bottom of chassis in poll.an tire imprint in pole also.
 

Attachments

  • Screenshot_20211101-114028_Chrome.jpg
    Screenshot_20211101-114028_Chrome.jpg
    290.1 KB · Views: 59
  • 20210516_061500.jpg
    20210516_061500.jpg
    335.1 KB · Views: 54
  • 20210516_061451_1.jpg
    20210516_061451_1.jpg
    208.2 KB · Views: 53
  • Screenshot_20210516-073645_Chrome.jpg
    Screenshot_20210516-073645_Chrome.jpg
    230.7 KB · Views: 61
  • 20210516_061512.jpg
    20210516_061512.jpg
    318.8 KB · Views: 59
Last edited:
75mph strait into a 10in tall curb.good way to throw 1000ish$ down the toilet.

Im Most proud of this achievement award than many others I've gotten in my lifetime....lol
Heres another ruined hr mount.hit this poll above 130mph.can see the screws from bottom of chassis in poll.an tire imprint in pole also.
Wow. Well no sense doing anything halfway right? 😜
 
I like the HR center mount. Get the 2 EZ mount parts. Use with the stock motor mount, makes a very nice system with no flex that will mess with the mesh.

These two parts here. Have them on every 6s I have owned.

Screenshot_20211126-174935_Chrome.jpg

Also makes removing the diff easier. Just remove the two screws to loosen the center mount and it can swing down out of the way a little and can remove the diff without moving the motor over and having to redo the mesh.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top