Hot Racing rear diff after 1 year of use.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Crash

Active Member
Messages
382
Reaction score
326
Location
Saturn
Arrma RC's
This is my hot racing rear differential after one year of use. I did replace the bearings and put a different weight of oil in it about 6 months ago but still have no leaks and all the screws are still tight. Other than wiping it down with a rag this is how it came out.
 

Attachments

  • 20180915_192520.jpg
    20180915_192520.jpg
    202.7 KB · Views: 141
  • 20180915_192530.jpg
    20180915_192530.jpg
    225.6 KB · Views: 132
Yep! By far my favorite upgrade. The Hot Racing center diff is such a great upgrade due to using loc tite and temps.
 
How's the wear/slop on the output shaft that comes out of the cup? Wondering if the aluminum is wearing more than the steel insert in the stock cup.
 
Its good! Its still smooth and with no movement. When I build my diffs they're pretty snug because of the shims. I make sure they're tight even a little notchy because they will loosen up after a while which kinda goes against conventional thinking that they should be smooth at the time of the build.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top