Hota d6 pro issue need help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

andyb75

New Member
Messages
4
Reaction score
2
Hi guys
Have the above charger but I’m unable to charge my 12v lead acid battery keeps coming up with connection error I’m plugging it into the xt60 socket any ideas the battery is at 2 v at the moment
 
2 v is pretty low. It probably doesn't recognize its there... just a guess
 
We used to work on these police radar trailers that had two 12v deep cycle marine batteries. When both batteries got too low (can't recall the voltage but much higher than 2v) the charging system wouldn't recognize the batteries and charge. We used to keep a small 12v UPS battery and use it to jump start the charger (connect in parallel to the two batteries). You could immediately remove the small battery and it would keep charging the big ones.
 
That’s interesting yes I wonder if that’s the issue I don’t have another spare battery but I do have another wall charger. Could start it off with that then try my new charger and see if that works
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top