Limitless How can I increase the range of my DX3 radio for speed runs?

[32.]

good morning I'm writing this post to understand some things.. I'm new to the rc world I have a build made up of a limitless, xlx2, castle 1721 2400kv and DX3 SMART 3-CHANNEL TRANSMITTER WITH SR315 RECEIVER I would need some advice to extend the range of the radio signal in so that I can unleash the full power of my model, thank you for the advice

 

[MicLim]

Goodmorning, you need to install a signal booster on your transmitter to extend the range .

 

[wtfmfer]

A better radio and receiver would help with range. Depends on your budget, but this is what I use:

https://www.amazon.com/Radiolink-Channels-Transmitter-Telemetry-Controller/dp/B0BRK3RBCM/

There is a newer version, but I heard mixed reviews about the new one. I'm sure there is updated info right here on this forum, so don't be afraid to search here first before making a decision.

https://www.amazon.com/Radiolink-RC8X-Transmitter-Receivers-Controller/dp/B0BPY14687/

 

[Dales396lt4]

I use a Radiolink RC6cgv3 it's a big step up from the DX3.

 

[LibertyMKiii]

Innovation RC on Youtube has a good signal booster install video.
Once you install that you should be good to go.

 

[slick2500]

We have a tutorial for adding a range booster to the DX5C here somewhere. I'm sure most of the same concepts would apply to the DX3.

 

[sert rc]

Sell the 1721 motor, buy a 1717-1650kv and take the remaining money and put it towards a transmitter that allows you to adjust dual rate and servo speed.

That motor is for experienced users, not beginners and unless you are extremely careful, you’ll burn it up along with your ESC. It’s not a motor for beginners.

As far as transmitters go, lowering the dual rate and the servo speed will allow the car to be less jerky at higher speeds which means you will crash less.

I crashed a ton before I was able to figure out the best settings for my steering. It takes some practice. Good luck.