How many chargers can I hook up to a 1320W PSU?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

dk10438

Active Member
Messages
651
Reaction score
962
Arrma RC's
  1. Limitless
Currently I'm using a 24v x 55 A= 1320 W PSU with a 1000 W PowerLab 6 charger and a parallel board. I'm thinking about getting a second charger and hooking it up to the PSU. Does anyone know if that would be a problem as long as I don't exceed drawing more than 1000W total from the PSU?

IMG_8132.jpg
 
I wouldn't do much more then 40amp with that PSU, so 1 30amp & 1 10amp charger, 2x20amp chargers, or however you want to flavor it.
 
So I guess you’re saying yes? The PL6 is a 40A charger but at the most I’m charging 2 x 4s at 8A so it’s a total of 16A so I’m assuming I’d have another 20A to work with another charger?
 
So I guess you’re saying yes? The PL6 is a 40A charger but at the most I’m charging 2 x 4s at 8A so it’s a total of 16A so I’m assuming I’d have another 20A to work with another charger?
Yes sir as many as you want up to 40amp, sometimes if your in a hurry maybe 50amp but at your own risk but hey im not gonna say i don't push my stuff to its boundaries sometimes when im in a hurry.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top