How the *peep* do i remove the diff indrive?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Mike-NLD

Active Member
Messages
1,229
Reaction score
1,040
Location
Breda - The Netherlands
Arrma RC's
  1. Outcast 6s
  2. Typhon 6s
After heating the little screw; i don't know the word for.. Wich is in the indrive of my rear diff.. I now need to take out the axle with the gear on the end..

But i just cannot get the indrive cup of!!

20190711_201711.jpg
 
After heating the little screw; i don't know the word for.. Wich is in the indrive of my rear diff.. I now need to take out the axle with the gear on the end..

But i just cannot get the indrive cup of!!

View attachment 42826
If this is the first time removing you'll need to heat that B with a hand torch to breakdown the excess LT between the shaft and the cup. I had same issue on Kraton. Here's a pic of what i used...
IMG_20190523_192345238.jpg
 
If this is the first time removing you'll need to heat that B with a hand torch to breakdown the excess LT between the shaft and the cup. I had same issue on Kraton. Here's a pic of what i used...View attachment 42831
You gotta be bucking kidding me ?
 
If this is the first time removing you'll need to heat that B with a hand torch to breakdown the excess LT between the shaft and the cup. I had same issue on Kraton. Here's a pic of what i used...View attachment 42831
Lol. Made me laugh. Nice rack
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top