Big Rock How to set the EPA (end-point) on Big Rock v3?

[parcou]

Hi

I have found info on how to set the EPA on Big Rock with the Tactic radio but I cannot find it for the Spektrum radio on the new Big Rock. I did not see it in the manual unless I missed it.

Does anyone know how to set the EPA on the new Big Rock?

Thx

 

[Arrmature]

From the SLT3 User Guide:

 

[parcou]

Thank you....will give it a try tomorrow...

 

[parcou]

Thx again for the info....

I also took a chance off this video since so many say the new radio is like the Tactic I did it like the video but did not have to go into any Binding mode/process. It was all done from the remote in programming mode.... Video is not exact to the SLT3 but gives the idea of the process if a newbie runs across this post.

My steps with the SLT3:

1. SLT3 Radio in programming similar to the Tactic
   1. With remote OFF
   2. Steering wheel all way to the right
   3. Full throttle on the trigger
   4. Hold those and power it ON
   5. My lights just blink continuously until I let the controls go
   6. Once I let go, the light goes off
2. Power ON the RC
3. Turn the remote knock to the side for adjustments
4. While holding the knock in the left/right direction. Use the A/B buttons to set your endpoint
5. Video (not the SLT3 but similar process):

 

[5th 3lement RC]

Excellent information I couldn't find any of this in the user manual, thanks.