Typhon Hybrid outcast, talion, typhon.

[Ryan A]

Typhon body and chasis, outcast towers, shocks, and arms. Talion hubs and tires. Only thing left to do is decide on what electronics to put in it. For electronics I went with savox 1210, hexfly hex6 6s version, and tp 4050 1570kv motor with 21t pinion. Also put tekno orange springs on the rear and M2C pistons in less bounce now. I also got NTF fans for my talion if anyone reads this those are high quality and very powerful.

 

[fpvmiller]

Looks like your rear springs might be a little too short and soft with that much preload. Can't go wrong with the stock blx185 system if you aren't trying to do anything crazy. I'm one of the outliers who used the xr8 escs from hobbywing (xr8+ and xr8 sct). Even on 4s my truggified typhon is still plenty fast on a 16t pinion.

 

[Ryan A]

Thanks for the suggestions. Yeah I had those springs lying around figured I would test them out on it just to see.

 

[calebgilmore]

Max6, Hobbystar 1480 or 1730. I kept the typhon towers for my black widow but added the kraton arms/hubs with talion wheels, and the dude buggy and another truggified street typhon run senton towers for the body mounts. I like those options for aftermarket bodies. I run a C10 body on dude sometimes and have a 56 ford body coming for my street typhon on grp s7's

 

[Ryan A]

Typhon body and chasis, outcast towers, shocks, and arms. Talion hubs and tires. Only thing left to do is decide on what electronics to put in it. For electronics I went with savox 1210, hexfly hex6 6s version, and tp 4050 1570kv motor with 21t pinion. Also put tekno orange springs on the rear and M2C pistons in less bounce now. I also got NTF fans for my talion if anyone reads this those are high quality and very powerful.

Correction about the fans they are powerful but not ment for bashing unless your just doing speed runs save your money.

 

[calebgilmore]

Correction about the fans they are powerful but not ment for bashing unless your just doing speed runs save your money.

Yeah I have broke 3 of the 4 ntf fans I have and that could be pricy to replace them from him. Thankfully I've found alternatives and may start setting up some packages that don't cost as much.