Senton I just brought home a Senton 4X4 with a SLT3 transmitter and it will not work out of the box.

[pirwin]

The manual makes reference to a SLR300 receiver but there is not one of these in the truck. The light on the 390288 ESC just flashes red.

 

[GRC]

Did you put batteries in the transmitter and turn it on? (The receiver is inside the receiver box.)

 

[Arrmature]

The manual makes reference to a SLR300 receiver but there is not one of these in the truck. The light on the 390288 ESC just flashes red.

The receiver should be inside the receiver box under the ESC. Did you open the box to confirm it's missing?

 

[pirwin]

I found the SLR300 but it did not come with a binding jumper. What 2 pins do you short?

The receiver should be inside the receiver box under the ESC. Did you open the box to confirm it's missing?

Yes i found it and made my own binding jumper. The light is flashing quickly but will not bind with the transmitter.

 

[Arrmature]

There should be a bind jumper somewhere in the packaging. You want to jumper the two outer pins.