Kingpin
Very Active Member
Here are the parts I am using.
TP 4070 1700kv
Max 6 ESC
ProModeler DS630 Servo https://www.promodeler.com/DS630BLHV
NTF Racing dual fans for motor and fan for ESC.
The fans are running off their own 2s battery.
But the gentlemen from Promodeler recommends a 3s battery for the servo.
I do not want to be running a 3rd battery in the car but I am willing to use a BEC.
I know the TP motor will be pushing the Max6 to it's limits but I'm not doing speed runs and will only be using a 16t/17t pinion so I'm not too worried about that but I am more worried about the servo which will be running at 7.4 volts.
I've never run a BEC so I'm not too sure about them. I was thinking about getting the CC BEC 2.0 WATERPROOF BEC and the Holmes adapter if I can find one.
Am I on the right track or is there anything I am missing and should know about?
Servo specs.
TP 4070 1700kv
Max 6 ESC
ProModeler DS630 Servo https://www.promodeler.com/DS630BLHV
NTF Racing dual fans for motor and fan for ESC.
The fans are running off their own 2s battery.
But the gentlemen from Promodeler recommends a 3s battery for the servo.
I do not want to be running a 3rd battery in the car but I am willing to use a BEC.
I know the TP motor will be pushing the Max6 to it's limits but I'm not doing speed runs and will only be using a 16t/17t pinion so I'm not too worried about that but I am more worried about the servo which will be running at 7.4 volts.
I've never run a BEC so I'm not too sure about them. I was thinking about getting the CC BEC 2.0 WATERPROOF BEC and the Holmes adapter if I can find one.
Am I on the right track or is there anything I am missing and should know about?
Servo specs.