Djoldskool50$
Member
Well as a newbie i upgraded my big rock blx3s to 4s. New 3670 2650kv and 120amp esc. Running double 2s packs. Not bad. I put on t bone racing bumper also i it ready 4 sale.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Sooooo... you upgraded it to 6s. You could run 6s, the motor and esc would handle it.Very nice . I just upgraded mine to 4s too. Put a 150a spektrum firma with a 2050 kv blx 6s motor . Would recommend upgrading cvds otherwise might pull the ujoints apart from the torque. Happened to me many times . Looks good bro!View attachment 143757
Yes, get the cvds, my stock ones pop on 3s sometimes.Well as a newbie i upgraded my big rock blx3s to 4s. New 3670 2650kv and 120amp esc. Running double 2s packs. Not bad. I put on t bone racing bumper also i it ready 4 sale.
View attachment 143753
You're probably going to want to upgrade your steering servo when it goes out. (The stock ones aren't the best) I would recomend this or this. You will need to get a 25T servo saver though. I have the 25kg servo on my Typhon 3s and the 20kg servo on my Traxxas Slash. They are both great, but the 20kg has 270 degrees of travel and the 25kg has 180 degrees of travel.Well as a newbie i upgraded my big rock blx3s to 4s. New 3670 2650kv and 120amp esc. Running double 2s packs. Not bad. I put on t bone racing bumper also i it ready 4 sale.
View attachment 143753
I know they would but not sure if my driveshafts and diffs could handle it is the problem.Sooooo... you upgraded it to 6s. You could run 6s, the motor and esc would handle it.
Yes, get the cvds, my stock ones pop on 3s sometimes.
You're probably going to want to upgrade your steering servo when it goes out. (The stock ones aren't the best) I would recomend this or this. You will need to get a 25T servo saver though. I have the 25kg servo on my Typhon 3s and the 20kg servo on my Traxxas Slash. They are both great, but the 20kg has 270 degrees of travel and the 25kg has 180 degrees of travel.
Why are you selling it?
nice, I',m better working on these. I picked up one i can't say brand but its by T.C and the car starts with P xp6 damn shame after 2 days and it defective i have to fix it. Thats why i enjoy My Typhon 3s (upgraded) my Senton 4x4 mega upgraded to 4s. And big rock im upgrade a voltage i like them hey what pinion you put in big rockVery nice . I just upgraded mine to 4s too. Put a 150a spektrum firma with a 2050 kv blx 6s motor . Would recommend upgrading cvds otherwise might pull the ujoints apart from the torque. Happened to me many times . Looks good bro!View attachment 143757
Yeah, they probably wouldn't in a basher, but I have mega diffs and stock driveshafts and plastic spur on 6s. With throttle control and almost no brake, nothing breaks.I know they would but not sure if my driveshafts and diffs could handle it is the problem.
Question why no brakes.?Yeah, they probably wouldn't in a basher, but I have mega diffs and stock driveshafts and plastic spur on 6s. With throttle control and almost no brake, nothing breaks.
If I brake too hard, it will strip the diffs and I can't figure out how to program 5% brakes on my surpass hobbies 150amp esc. And the trigger is super touchy. I use them carefully if I need to though.Question why no brakes.?
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!