Granite Installing Sound System on Granite Voltage Possible?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

da_xtreme

Member
Messages
8
Reaction score
4
Arrma RC's
  1. Granite
  2. Voltage
Is it possible to install RC Sound System on a granite voltage. If yes, anybody know how to do it?

Screen Shot 2022-04-30 at 8.37.33 PM.png


Screen Shot 2022-04-30 at 8.37.22 PM.png
 
You should be able to. The wiring diagram is pretty self explanatory. Needs power, goes between the ESC and receiver and the Aux channel probably controls some functionality
 
Just to add, the Deans plug is no bueno on a Granite. You’ll need to solder some leads onto the ESC side to tap power from the LiPo to run it or change out the connector to an appropriate one and run it off the balance leads of the LiPo.

But aren’t these things made for crawlers? I think the engine sound might be mismatched with the speed of a 3S bashing truck.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top