Typhon Is this a good tool kit?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
dk3000 said:
Looks like these that I've used for about 6 months and have zero regret. I also have mips drivers and a few from Wera.
https://www.amazon.com/dp/B014ERIFU...abc_Z4D6VPFG4E5CJH8TTTXQ?_encoding=UTF8&psc=1
Click to expand...
Okay, maybe i'll order your the ones you posted. They are a whole 99 cents cheaper. :ROFLMAO: :ROFLMAO: And they look to be the same exact thing. Do they fit down the drive shafts to take the drive shafts off of the diff?
And maybe i'll get this too.

https://www.amazon.com/Hobbypower-W...=7mm+rc+tire+iron&qid=1614963120&s=hi&sr=1-12
 
These have worked well for me over a year now and fit down driveshafts.

https://www.amazon.com/NEEWER®-Titanium-Nitride-Driver-Wrench/dp/B07NSGNLY8?th=1
 
Rainger40 said:
These have worked well for me over a year now and fit down driveshafts.
https://www.amazon.com/NEEWER®-Titanium-Nitride-Driver-Wrench/dp/B07NSGNLY8?th=1
Click to expand...
Maybe i'll get the cheaper ones then if I don't like them i'll look into 👆them. They look to be the same concept and they are both adjustable, titanium nitride coating etc.
 
Ginglehopper said:
Okay, maybe i'll order your the ones you posted. They are a whole 99 cents cheaper. :ROFLMAO: :ROFLMAO: And they look to be the same exact thing. Do they fit down the drive shafts to take the drive shafts off of the diff?
And maybe i'll get this too.

https://www.amazon.com/Hobbypower-W...=7mm+rc+tire+iron&qid=1614963120&s=hi&sr=1-12
Click to expand...
I'm not sure what u mean but they are narrow enough to get in there and have excellent grip and wear. I use the Wera until I need tightness as the Wera are higher end for electricians.

That other tool is the same as what comes in the arrma tool kit imo. I just use a normal 1/4 socket set for those jobs.
 
dk3000 said:
I'm not sure what u mean but they are narrow enough to get in there and have excellent grip and wear. I use the Wera until I need tightness as the Wera are higher end for electricians.

That other tool is the same as what comes in the arrma tool kit imo. I just use a normal 1/4 socket set for those jobs.
Click to expand...
Yes, I was wondering if they were narrow enought. The ones I have now aren't and I have to use standard sizes and I might strip them out. Thanks!
 
Just showing off👊

16149647729744262405577841101012.jpg
 
I just recently got the mip speed tips, they’re nice, we’ll see how they hold up. Maybe one day I’ll upgrade all the wrenches, but to do so I’d have a few hundred dollars into them probably.
 
Good tools are never a bad investment really because they should last long enough to be worth the investment, but $15/wrench isn’t in everyone’s budget and if you went with their full lineup you’d have another 3s arrma.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

EOTR
Kraton Is this Overkill??
Replies
7
Views
475
danny1202
danny1202
3Jean
Kraton Is Arrma always this bad?
Replies
18
Views
385
sumguy75
sumguy75
vortekyteky
Vorteks Differential binding? Is this a good diff setup?
Replies
3
Views
521
vortekyteky
vortekyteky
bigbristv
Vendetta This Thing is AMAZING!
Replies
12
Views
665
bigbristv
bigbristv
L
Senton Is this an ESC problem?
Replies
12
Views
418
ldizzle
L
Back
Top