Kraton Is this kind of play in the hub nuts normal?

[iLikeRCs]

I am changing the bearings to rubber sealed ones as the original ones are kind of rusty after a year and I am wondering if this play is normal or if it shouldn't be there:

 

[Thomas90]

Might be a good idea to change the bearings yes.. I had probs the same amount of slop on mine changed the bearings and that helped a lot...

 

[iLikeRCs]

Might be a good idea to change the bearings yes.. I had probs the same amount of slop on mine changed the bearings and that helped a lot...

This was shot after the bearing change, so they're brand new

 

[Thomas90]

This was shot after the bearing change, so they're brand new

Hmm thats weird..for me it helped quit a bit..maby add a shim or 2 ive seen threads were they talked about this but cant find it on the fly this moment

 

[jondilly1974]

Yes that’s normal but not desired. You can buy some shims to take out some of that slop if it bothers you. For a basher, that’s ok. If it’s a speed runner where mm mater, then clean it up with some shims.

 

[soSincerious]

a few shims will do it. here are the ones I used: TKR1222

 

[iLikeRCs]

Okay thanks to everyone!

 

[bicketybam]

I think "in and out" play is normal but I don't speed run unless I can't sleep ?