- Messages
- 6,754
- Reaction score
- 12,426
- Location
- ST.LOUIS
- Arrma RC's
- BigRock 4x4
- Mojave
- Notorious
- Senton 6s
- Senton 3s
- Typhon 6s
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It's because you went above the recommended Amp draw of 350v for the MMX8S. Looks like you pulled 385A is why it flagged. I get it occasionally as well just pulled logs from my stagnant passes made yesterday and got it as I did like 351 Amps. It's just a warning stating that the ESC could be damaged as it's above the recommended threshold. But ya sucks think I'm tapped out on 6s unfortunately with the motor I'm running so have to go up to 8s here's my log that threw the warning as well.
Its usely just under 8hp on 6s an just under 11hp on 8s ..wonder if taller gearing putting more of a strain on motor would pull a higher hp #??It's because you went above the recommended Amp draw of 350v for the MMX8S. Looks like you pulled 385A is why it flagged. I get it occasionally as well just pulled logs from my stagnant passes made yesterday and got it as I did like 351 Amps. It's just a warning stating that the ESC could be damaged as it's above the recommended threshold. But ya sucks think I'm tapped out on 6s unfortunately with the motor I'm running so have to go up to 8s here's my log that threw the warning as well. View attachment 140105
Crazy I'm pulling a little more HP on 6s than you running 8s lol.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!