Kraton Issue with steering assembly

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Qasim2021

Everyday as it comes...
Messages
170
Reaction score
44
Arrma RC's
  1. Kraton 6s
Hi All I have upgraded my steering servo and replaced bearing on gearbox but now when I put the gearbox back in it is catching with the bar that is in the middle. Any ideas? Also as you can see my chassis is bent is it due to this or is it supposed to be this way.
 

Attachments

  • 20200507_195004.jpg
    20200507_195004.jpg
    287.8 KB · Views: 61
super hard to see in the picture because the ackerman is so blurry..but it looks to me like the ackerman is upside down.. the arc should be away from the diff not towards it...?
 
fiddlesticking great now I have another issue the screw got stripped.
One side of the ackerman is out and one side is FUBAR
fiddlesticking great now I have another issue the screw got stripped.
One side of the ackerman is out and one side is FUBAR
GPM parts are really poor quality the screws are too soft.
 
Last edited:
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top