Infraction JonDilly1974 Infraction V2 Build Thread

[jondilly1974]

Not sure why I never made a build thread for the Infraction V2 but here we go. This has been built over the last year or so from parts, so this is iteration 1000000000000

Lets see how much I can remember:

Castle XLX2
Castle 1717-1650
PPS full setup, motor mount, diff mount, diff cover, handbrake mount (removed)
King Hobby (eBay) F/R Aluminum chassis braces
Scorched RC F/R spools, eBay (Mugen?) center spool
CRCU 8mm Ti center driveshafts
CRCU 0 degree rear C Block
RCAWD F/R CVD driveshafts
HOOY Aluminum front splitter
Luxury CF side skirts
Luxury CF rear winglets
Custom made rear wing by Basherqueen
Flysky FTR10 rx
Flysky Thermal Probe (motor)
DS3235SG servo
Arrma AR727410 droop screws
GRP S1 Silver 1/8 Revo tires
QS8E connectors
SkyRC GSM020 GPS
All camber at about -1 degree
All caster neutral

 

[Cheez]

Impecable

 

[Mr.Duke]

Notice any difference in speed or stability running the zero degree C block?

 

[jondilly1974]

Notice any difference in speed or stability running the zero degree C block?

You would have to ask the field I have been dealing with aero issues since installing it, so it’s hard to say. I will get to a point where it is dialed in and maybe swap back.

 

[TriggerHappy]

You would have to ask the field I have been dealing with aero issues since installing it, so it’s hard to say. I will get to a point where it is dialed in and maybe swap back.

If it survives your driving skills

 

[The Donut Man]

This thing is fully loaded; very nice. It’s a bit of a sleeper with the stock shell, too

 

[TriggerHappy]

Nice rig no doubt. If i tried to speed run with an infraction i would lose it. Atleast you find yours

 

[KvConivore]

Awesome rig

 

[Boggs3010]

Nice and clean.

 

[jondilly1974]

 

[Woodentop]

Super clean
Nice build

 

[BashingBrian]

Nice build.... I see some of mine in yours

 

[SarsK9]

@jondilly1974 curious as to why you’re running what I’m assuming is zero caster when you say neutral caster. Wouldn’t you want to run positive caster to increase stability?

 

[jondilly1974]

@jondilly1974 curious as to why you’re running what I’m assuming is zero caster when you say neutral caster. Wouldn’t you want to run positive caster to increase stability?

Caster is neutral. Camber is 0 to -1 degree. Some minor negative camber helps when it squats under massive downforce generated at higher speeds.

 

[Danyrc]

Caster is neutral. Camber is 0 to -1 degree. Some minor negative camber helps when it squats under massive downforce generated at higher speeds.

I always use positive caster for straight line stability, a neutral caster will make the car very unstable.

 

[jondilly1974]

I always use positive caster for straight line stability, a neutral caster will make the car very unstable.

I think I meant neutral toe, not caster.

 

[Absolute RC noob]

Looks epic

 

[jondilly1974]

She has become a C8 GT car as of today. Done trying to put that truck body down the road at 140mph. This has got to be easier. If I get this down the road easier, I will know it was the truck body. Question is, do I try to make a pass before or after paint?

 

[Doom!]

Question is, do I try to make a pass before or after paint?

How good are your eyes with a clear body on?

 

[LibertyMKiii]

Looks good, the C8 infraction v2 is the build I would love to do next.