Typhon Just joined here is my typhon

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

arrmatyphon

Member
Messages
48
Reaction score
8
Arrma RC's
Hi just joined here is my arrma typhon. It has the hobbywing max 8 combo 2200kv motor running a 19t pinion and 2.2 badlands. Diff oils are 60F/100C/30R and using Graphene 2x5000mah 3s 65c lipos. Yeah racing fan on the esc. Doing bashing at parks atm. Will look at other motor options later on.
 

Attachments

  • 27534896_389209204861695_614613471_o.jpg
    27534896_389209204861695_614613471_o.jpg
    315.2 KB · Views: 108
  • 27653330_389209211528361_1475875891_o.jpg
    27653330_389209211528361_1475875891_o.jpg
    285.9 KB · Views: 90
  • 27711501_389209201528362_2098050469_o.jpg
    27711501_389209201528362_2098050469_o.jpg
    313.8 KB · Views: 84
Like your typhon. What motor mount is that?

I have the same setup in my tr-mt8e be6s and seems like a good combo - the motor seems to run on the hot side even with heat sink/fan. It is a heavy truck though compared to the typhon.

Justin
 
Its the hobbywing 2200kv. My temps are fine buy i keep eye on the temps all the time to
 
Welcome to the forums, looks like you know what you are doing... ;)

What brand, and where did you get the CNC engine mount?
Can you post number$ how much that ESC/motor combo run you for?
 
ty mr crankestein. Yes thats right joostin its from marhor here in australia. Was $190.00 AUS for the combo
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top