- Messages
- 6,384
- Reaction score
- 12,563
- Arrma RC's
- Nero
Hey ARRMA fam,
this is a new scratch build I just put together so it’s had 0 run time..
There were some reclaimed items used for the build however they are 100% in functioning order they just may have a scratch or two or maybe some dirt from the 1 time I used the shocks on another vehicle. These items are:
M2c chassis - very light use
Shocks - very light use
Blx system - very little if any use
Corally Kronos tires - very little if any use
I will try to do my best with part breakdown but I’ll probably forget some things.. this unit is what I would call a “V4.5” it has some exb parts and some other really nice aftermarket parts..
M2C chassis (v4 style)
Exb front arms upper/lower with exb hinge pin system.
RPM rear arms
RPM rear mudguards
Exb front and rear chassis braces
Basherqueen towers(v4) and Ackerman
Exb servo saver
Aluminum hinge pin blocks
Powerhobby heat sink and fan combo
Tbone front bumper
Full fast eddy bearing kit
Exb diffs (all) middle has been serviced and new fluid put in. The other two are just fresh diff assemblies from JRC.
Has a blx 185 system in it with a sr315 and Slt3..
BUYER WILL NEED TO PAY SHIPPING.
Ship to USA only.
Thank you for looking!
$550 split shipping
this is a new scratch build I just put together so it’s had 0 run time..
There were some reclaimed items used for the build however they are 100% in functioning order they just may have a scratch or two or maybe some dirt from the 1 time I used the shocks on another vehicle. These items are:
M2c chassis - very light use
Shocks - very light use
Blx system - very little if any use
Corally Kronos tires - very little if any use
I will try to do my best with part breakdown but I’ll probably forget some things.. this unit is what I would call a “V4.5” it has some exb parts and some other really nice aftermarket parts..
M2C chassis (v4 style)
Exb front arms upper/lower with exb hinge pin system.
RPM rear arms
RPM rear mudguards
Exb front and rear chassis braces
Basherqueen towers(v4) and Ackerman
Exb servo saver
Aluminum hinge pin blocks
Powerhobby heat sink and fan combo
Tbone front bumper
Full fast eddy bearing kit
Exb diffs (all) middle has been serviced and new fluid put in. The other two are just fresh diff assemblies from JRC.
Has a blx 185 system in it with a sr315 and Slt3..
BUYER WILL NEED TO PAY SHIPPING.
Ship to USA only.
Thank you for looking!
$550 split shipping
Last edited: