How you all doing? I am opening up a new tattoo shop and need to sell some of my toys… I want to see what I can get for my kraton… here is what’s done to her and included
Arrma kraton version 4 (bought it a month before V5 was released… bastards)
Savox 1210 waterproof servo
Traxxas 3 channel transmitter with Bluetooth link installed. Easy tuning via the app
Traxxas receiver which has stability control…. Amazing feature for the not so experienced
SMC lipo alarm (hooks into balance plug)
Hobby wing Max 6 esc
Hobby wing 1650kv motor
Hot Racing aluminum complete center diff carrier
Hot Racing steering rack with Arrma upgraded servo saver spring
Hot Racing closed end wheel nuts
Hot Racing front top plate aluminum brace
M2C chassis
M2C front & rear shock towers
M2C rear shock tower brace
M2C esc mount for max 6
M2C HD shock standoffs
M2C Ackerman plate
M2C shock bushing balls
Tekno shock spring perch
Tekno shock ends and balls
Tekno pinion gear
Chassis protector "money time"
Rear axle/diff mud guards
Integy front steering knuckles and rear hubs carriers
Twin Powerhobby motor fans, powered via the esc
Single strap aluminum fan mount
Rubber o-ring around rear of motor for support
Super duty esc fan, aluminum, powered via tiny 3s lipo but could be powered by esc
Esc 3d printed fan mount
Arrma EXB front and rear chassis braces red aluminum
One piece aluminum servo mount
Proline easy mount body screws (instead of body pins to hold the body on)
Tuned suspension…. Spring rate increased and shock oil thickened slightly… runs like a dream.
Aluminum suspension pin holders
Upgraded droop screws
Upgraded bearings all around
RPM suspension arms all the way around
T-Bone Rc front and rear bumpers
3dRC rear wing mount made out of soft filament… "unbreakable"
Diffs have been rebuilt and I am running 60k front, 500k center, 30k rear… this seams to work best with this power system and suspension set up…
I am sure I am missing some things…. But I am including 4 ARRMA Backflip 3.8 wheels, duratrax bandito 3.8 wheels, and extra white rear wing, some charger leads for the batteries, stock new rear wing mount, and the manul...
I am also including 2- Powerhobby 5000mah 100c 6s lipo batteries…. All my batteries are cycled and storage charged…
I am also including a Towerhobby 800mah 3s lipo battery for the esc fan… you mount this little battery with the straps provided…
Looking to get $1000… maybe I am crazy?!?! But I am sure you all will let me know either way! Hahaha I think the kraton alone is worth that… the extra wheels and batteries are just to sweeten the pot…
Thank you
Arrma kraton version 4 (bought it a month before V5 was released… bastards)
Savox 1210 waterproof servo
Traxxas 3 channel transmitter with Bluetooth link installed. Easy tuning via the app
Traxxas receiver which has stability control…. Amazing feature for the not so experienced
SMC lipo alarm (hooks into balance plug)
Hobby wing Max 6 esc
Hobby wing 1650kv motor
Hot Racing aluminum complete center diff carrier
Hot Racing steering rack with Arrma upgraded servo saver spring
Hot Racing closed end wheel nuts
Hot Racing front top plate aluminum brace
M2C chassis
M2C front & rear shock towers
M2C rear shock tower brace
M2C esc mount for max 6
M2C HD shock standoffs
M2C Ackerman plate
M2C shock bushing balls
Tekno shock spring perch
Tekno shock ends and balls
Tekno pinion gear
Chassis protector "money time"
Rear axle/diff mud guards
Integy front steering knuckles and rear hubs carriers
Twin Powerhobby motor fans, powered via the esc
Single strap aluminum fan mount
Rubber o-ring around rear of motor for support
Super duty esc fan, aluminum, powered via tiny 3s lipo but could be powered by esc
Esc 3d printed fan mount
Arrma EXB front and rear chassis braces red aluminum
One piece aluminum servo mount
Proline easy mount body screws (instead of body pins to hold the body on)
Tuned suspension…. Spring rate increased and shock oil thickened slightly… runs like a dream.
Aluminum suspension pin holders
Upgraded droop screws
Upgraded bearings all around
RPM suspension arms all the way around
T-Bone Rc front and rear bumpers
3dRC rear wing mount made out of soft filament… "unbreakable"
Diffs have been rebuilt and I am running 60k front, 500k center, 30k rear… this seams to work best with this power system and suspension set up…
I am sure I am missing some things…. But I am including 4 ARRMA Backflip 3.8 wheels, duratrax bandito 3.8 wheels, and extra white rear wing, some charger leads for the batteries, stock new rear wing mount, and the manul...
I am also including 2- Powerhobby 5000mah 100c 6s lipo batteries…. All my batteries are cycled and storage charged…
I am also including a Towerhobby 800mah 3s lipo battery for the esc fan… you mount this little battery with the straps provided…
Looking to get $1000… maybe I am crazy?!?! But I am sure you all will let me know either way! Hahaha I think the kraton alone is worth that… the extra wheels and batteries are just to sweeten the pot…
Thank you
Last edited: