Kraton Kraton/Notorius/OutKast front cvd’s in the rear?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Clubin

Very Active Member
Build Thread Contributor
Messages
2,636
Reaction score
6,036
Location
Gimli Manitoba
Arrma RC's
  1. Kraton 8S
  2. Kraton 6s
  3. Kraton EXB
  4. Outcast 8s
  5. Outcast 6s
  6. Vorteks
I put a front set of cvd’s in the rear of my kraton. Any one else done it?
I found a slight bind at full droop.
im sure it will beat itself into place.
I’ll run it this afternoon.
 
Yep, no bind in a Notorious, if you have bind at droop check your camber links, and try different hole combinations on the tower & hub. You have too much negative camber at full droop. You should have -2° at rest, more at full squat, and 0° at droop, you shouldn't be adding camber as the suspension travels down, you want more when it compresses thru the turns. ?
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top