Kraton Kraton rear shock lower arm mount

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

GBR

Fairly New Member
Messages
4
Reaction score
1
Arrma RC's
I just received a kraton v2 and I'm new to the hobby. I checked all the screws for tightness and discovered that the rear shock bottoms are held in with a pin but no set screw to hold them in the arm. I can remove the pin by hand. Is there something missing?
 
I just received a kraton v2 and I'm new to the hobby. I checked all the screws for tightness and discovered that the rear shock bottoms are held in with a pin but no set screw to hold them in the arm. I can remove the pin by hand. Is there something missing?

There should be a screwon the top of the arm that holds the pin in - see page 40 of the manual. Give the screw a tighten and this should fix the issue.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top