Kraton Kraton Steering issues

[CH048swRCMaster]

My servo will turn but my wheels won’t! I am very confused, because I took apart the whole steering area and saw NOTHING broken. WATCH THE VIDEO TO SEE IN WHAT IS HAPPENING IN DEPTH.

 

[CH048swRCMaster]

Let me know if the video sent or not

 

[CH048swRCMaster]

I can also send pics of the parts and stuff.

 

[Eric Barneycastle]

No video

 

[CH048swRCMaster]

How about now

 

[Eric Barneycastle]

No video. Can you turn the wheels by hand? Is there any resistance?

 

[CH048swRCMaster]

Yeah i can turn the wheels by hand

 

[Eric Barneycastle]

Does the servo horn move with the servo or just the shaft for the servo?

 

[Jimbobjr]

Sounds like your servo saver needs to be tightened, they tend to loosen as you drive.

If it’s a v4 you may have another issue as they appear to be not adjustable.

 

[Eric Barneycastle]

What version Kraton is it?

 

[Eric Barneycastle]

Sounds like your servo saver needs to be tightened, they tend to loosen as you drive.

If it’s a v4 you may have another issue as they appear to be not adjustable.

That's what I was getting to, just wanted to make sure it wasn't a V4 and that he could actually tighten it up.

 

[CH048swRCMaster]

Ok I shortened the video. It should work now. I think it has to be less than a min.

 

[CH048swRCMaster]

V3

 

[CH048swRCMaster]

I give up on the video

 

[Eric Barneycastle]

V3

Probably the servo saver like Jimbobjr said. Watch the video he posted.

 

[CH048swRCMaster]

Ok

 

[CH048swRCMaster]

Do i just tighten that part of the servo saver

 

[Eric Barneycastle]

Do i just tighten that part of the servo saver

Yeah, use a screwdriver to hold the ridges on the nut and turn the wheels. Let go of the ridge, turn the wheels back then hold the ridge again etc..

 

[CH048swRCMaster]

Ok ill do that, just to be sure we are talking about that(look at the pic) right

 

[Eric Barneycastle]

That's it. There's a hole in the bottom of the chassis to get to it too. Just to make sure, I'm looking at your picture and there is nothing connected to the servo saver to make it turn. The servo should be attached to that arm with the hole in it.