SrC
RC is a lifestyle choice
Lifetime Premium!
Premium Member
Excellence Award
Hospitality Award
Build Thread Contributor
- Messages
- 22,472
- Reaction score
- 30,870
- Location
- Queens, NYC
- Arrma RC's
- Fireteam
- Infraction
- Limitless
- Kraton 6s
- Mojave
- Notorious
- Outcast 6s
- Typhon TLR
Pillow ball unthreading/pulling out has occurred with all revisions. No, Arrma never addressed that in my opinion. I say the problem lies with the arm plastics and the threads of the pillow balls are much too coarse. This combination is a recipe for this issue.I recently acquired a new V3. Same problem after a few laps on the track.
I've seen the problem using RPM upper and lower front arms. The coarse threading may be the major culprit. The arms need to be fiber embedded and more rigid to hold onto the coarse PB threads.