Kraton Kraton v3 outdrives

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Pfaulk54271

Very Active Member
Messages
381
Reaction score
804
Location
Parrish, FL
Arrma RC's
  1. Talion
  2. Voltage
  3. Notorious
  4. BigRock 4x4
Does anyone have direct fit mugen part numbers for the kraton outdrives? Fr/rr and centers? Is everyone hardening the stock ones? I am changing over to m2c chassis, leopard 4092/1480 and max6 very soon and would like to make the entire drivetrain last as long as possible. I appreciate any recommendations, thanks!
 
Last edited:
Any help is greatly appreciated....
 
Last edited:

Attachments

  • 21DC32E3-4A33-4E23-AA33-DF050D056266.jpeg
    21DC32E3-4A33-4E23-AA33-DF050D056266.jpeg
    285.4 KB · Views: 91
For the CVD’s you just left them as is?
Yes , with cvd’s you don’t need to limit the travel ,I used to have a problem with front cvd’s binding with the stock arrma outdrives, after installing mugen outdrives the problem is gone
 
A foam, neoprene or rubber insert would probably work in that cup as well, in case the epoxy doesn't hold up.
I don’t see that epoxy letting off ever, It’s strong as metal... btw I can’t comment on durability of those outdrives as I’ve done only a couple of cycles with them installed
 
What about driveshafts and pins? I don't have very many batteries through mine on the stock motor and some of my pins are looking very rough already. Any tips there? Any alternate, harder parts to replace those? I need this stuff to be as bulletproof as possible.
 
Last edited:
There’s a comparison picture of the outdrives from arrma and mugen
 

Attachments

  • 52A935AA-4E8D-42B2-BEE0-36E930AF170F.jpeg
    52A935AA-4E8D-42B2-BEE0-36E930AF170F.jpeg
    493.8 KB · Views: 80
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top