Kraton XL and Talion XL Basherqueen conversion

[Rcproponent]

Wow, these are pretty cool… so I thought I’d share

They are a bit spendy but they are a lot better than some of the solutions I’ve seen out there

If you buy 4 at a time you can get ‘em for way cheaper.. so if you go in with a friend it could benefit you ..

Kraton:

https://www.ebay.com/itm/1552942506...SgpnzFsTL6&var=&widget_ver=artemis&media=COPY

Talion:

https://www.ebay.com/itm/1552999452...SgpnzFsTL6&var=&widget_ver=artemis&media=COPY

 

[Jeppyjep]

Wow, these are pretty cool… so I thought I’d share

They are a bit spendy but they are a lot better than some of the solutions I’ve seen out there

If you buy 4 at a time you can get ‘em for way cheaper.. so if you go in with a friend it could benefit you ..

Kraton:View attachment 262955
https://www.ebay.com/itm/1552942506...SgpnzFsTL6&var=&widget_ver=artemis&media=COPY

Talion:View attachment 262956
https://www.ebay.com/itm/1552999452...SgpnzFsTL6&var=&widget_ver=artemis&media=COPY

That’s straight up sexy . I’m definitely getting that setup for my stretched Typhon

 

[Armarookie43]

Wow, these are pretty cool… so I thought I’d share

They are a bit spendy but they are a lot better than some of the solutions I’ve seen out there

If you buy 4 at a time you can get ‘em for way cheaper.. so if you go in with a friend it could benefit you ..

Kraton:View attachment 262955
https://www.ebay.com/itm/1552942506...SgpnzFsTL6&var=&widget_ver=artemis&media=COPY

Talion:View attachment 262956
https://www.ebay.com/itm/1552999452...SgpnzFsTL6&var=&widget_ver=artemis&media=COPY

Mine should be here today for my XL K6S.

 

[Fishtank]

This forum! Always showing me sh$t I don’t need but I gotta have!!!

 

[Dan B.]

What a beautiful solution!

 

[Fishtank]

I got 2 figured I’d try them out.

 

[Armarookie43]

Mine are here, but I have too much work and family life right now. I'll probably be able to install it on Sunday.

 

[Rcproponent]

Think I’m gonna get a couple too..

 

[Armarookie43]

Think I’m gonna get a couple too..

It looks stout and it's a quick solution to mount bodies on the XL stuff

 

[Armarookie43]

It's here. I just have to install it tomorrow

 

[Armarookie43]

I'm done. But it didn't work out because I need the rear body posts from the K6S. I'll take pictures of how I did it. Ignore the wrong body posts . The smaller bushings with the bigger bolts go on the bottom. The bigger bushings go on top. Put the rear part together first, then do the rear bolts. You need to replace the bolts that you screw the body posts with the 1.5 mm set screws. You also need to to replace the bottom screws that go through the bulkhead with the bigger ones provided. I used an Allen wrench on the front side to help finish things up. Not hard at all to figure the installation out without instructions. But I did have to think how to do it :

 

[KevinC]

Here's some close up video of the extension.

 

[Armarookie43]

I'm finally done. Correct body posts installed :

 

[Fishtank]

Put mine on this morning. Definitely stiffer then the old way.

 

[Rcproponent]

Put mine on this morning. Definitely stiffer then the old way. View attachment 264983View attachment 264984View attachment 264985View attachment 264986View attachment 264987View attachment 264988View attachment 264989View attachment 264990

Looks great. I love that body man. So sick.


Mines in the mail! Should be on soon.

 

[Armarookie43]

Put mine on this morning. Definitely stiffer then the old way. View attachment 264983View attachment 264984View attachment 264985View attachment 264986View attachment 264987View attachment 264988View attachment 264989View attachment 264990

Nice custom body. The mount survived some skatepark action today. The lower control arm and hinge pin didn't

 

[Moirae]

I'm conflicted, it looks nice and lowkey I want one but at the same time I think 40$ a pop is redonkulous when the alternative is 10$ and has held up on my Talion XL with zero problems and I jump it pretty good. Maybe I should check out that discount on 4 as the price is pretty prohibitive for anyone who has more than 1 rig.

Definitely looks sweet though. I'll probably get at least one

 

[Rcproponent]

I'm conflicted, it looks nice and lowkey I want one but at the same time I think 40$ a pop is redonkulous when the alternative is 10$ and has held up on my Talion XL with zero problems and I jump it pretty good. Maybe I should check out that discount on 4 as the price is pretty prohibitive for anyone who has more than 1 rig.

Definitely looks sweet though. I'll probably get at least one

Thought crossed my mind to get 4… I bet if you order (4) for the discount and send her a message she could change it to (2) Kraton and (2) talion.

 

[Rcproponent]

Got mine installed

 

[sumguy75]

These make sense for a stretch Typhon because there are no bodies long enough. Not sure what the point is for a Kraton XL, just buy a longer body that will fit.