Senton Lil more bling to the S6

[MFM]

Scooped up a v1 roller to bash the wheels off so this one gonna be shelved for now lol.
hotdog custom red Kevlar center brace;-). Cf/Kevlar makes me smile. As does titanium;-).
will post up pics of the v1 roller when she arrives.

 

[#ARRMArcfanboy4life]

does the v4 and on come with a different servo saver bc mine can tighten all the way

 

[MFM]

Huh? What do you mean? I have this bellcrank in all my rigs. If you’re running after market servo then I recommend these.

 

[MFM]

This going in the v1 roller;-)

 

[GilMKIII]

What’s your goal with it? My local hobby shop does some asphalt racing on Sundays. I plan on dominating all.

 

[MFM]

Have u ripped w those on yet? I have one for off road / track days and one FOR the asphalt lol. Gonna speed check em and do a few sprints.

One is v5 rtr spektrum and the other isn’t LOL

 

[GilMKIII]

I’ve been running it recently. It’s fast, however, I run out of space really fast........

got replacement parts on the way already.

 

[MFM]

She needs a lot of room!! I did the same exact thing first time out w her!! Same side too!! I’m waiting for decent enough weather to take em out. Awesome!

 

[GilMKIII]

A friend here at work has a LCG 2wd Slash that he converted to a speed car, he's jammed a MAX8 esc and a 1/8 scale Arrma motor. He was impressed by my speed with just a pinion increase and the Hoons. So naturally we went heads up on a race. That tap was at about 30mph roughly.

 

[MFM]

A friend here at work has a LCG 2wd Slash that he converted to a speed car, he's jammed a MAX8 esc and a 1/8 scale Arrma motor. He was impressed by my speed with just a pinion increase and the Hoons. So naturally we went heads up on a race. That tap was at about 30mph roughly.

Those slash’s can fly on 3s!! My local hobby shop did 108 on 3s I believe!!
I however have yet to lose a battle to a slash!!
tried to get a few speed runs in w these bad boys to get an idea of how much speed they putting out!! What speeds / gearing y’all beast yours? I only run 6s but going to try 3/4s on the track.
Will post stats after I run em

 

[GilMKIII]

I’m at a 19t so far. Might try a 21t with a spare motor I have. I alternate between 4 and 6s

 

[MFM]

I’m gonna run em on 4 and 6 as well. My spektrum 2050kv 18/50 pulled 60mph. Rode like a dream slammed on hoons. Didn’t get a chance to rip the freak show yet 2200kv running 22/46 ;-). Hopefully I can get a few rips in!! Pics n vids coming;-)

 

[GilMKIII]

When you adjust the droop screws, do you turn them all the way out to lower it??

 

[MFM]

She’s ready to rock!!

When you adjust the droop screws, do you turn them all the way out to lower it??

Do em one rotation at a time til U get desired height. Righty tighty drops em in thus lowering the ride height. Loosen lifts. I also measure and level LOL 4 corner balance.

 

[calebgilmore]

I converted over a typhon to a senton and had mojave wheels on it for a bit but never ran it that way. They def looked too tall. I ended up putting a pair of pro line buggy badlands on it but still need to put my 40x28's on the motor/max6 hahahaha. Basherqueen has some carbon fiber towers out now, and i put a carbon fiber center brace on mine as well.

 

[MFM]

I converted over a typhon to a senton and had mojave wheels on it for a bit but never ran it that way. They def looked too tall. I ended up putting a pair of pro line buggy badlands on it but still need to put my 40x28's on the motor/max6 hahahaha. Basherqueen has some carbon fiber towers out now, and i put a carbon fiber center brace on mine as well.

Damn!! Max6 in a senphon!!

 

[calebgilmore]

Damn!! Max6 in a senphon!!

I'll get the fans on at some point and when i'm not lazy put the basherqueen towers on it.

 

[MFM]

Ooh!! Sexy af! Haven’t had much luck w the basherqueen stuff. Looks sweet! Love that body!

 

[calebgilmore]

Ooh!! Sexy af! Haven’t had much luck w the basherqueen stuff. Looks sweet! Love that body!

I couldn't fit the on/off button on the spot for the max6 mount, it ends up under the servo mount a little. I'll hot glue it to the center diff cover. Prob have to extend my motor leads to clear the 40x28. I ended up using that kaos rc max6 fan mount on my UDR so i have to get another one to put the fan on the max6 I was going to heatwave my udr but decided to wrap the body in army green vinyl for it so it'll be different from this one.
Oh i also fitted it with outcast side skirts to help keep some of the crap out hopefully

 

[MFM]

Just noticed something. What’s the 3D printed piece on the center?