Limitless pinion pitch

[Kezturbo]

Hi does anyone know what pitch is the pinion that’s used in the limitless? Is it 0.5 or 0.8 thanks

 

[Mastaa]

It's mod 1.0. Are you by chance refering to the shaft diameter / bore?

 

[Yankeedoodle30]

Start by reading these two FYI article.s https://rogershobbycenter.com/rc-gearing-101 and https://www.radiocontrolinfo.com/rc-car-gear-pitches/

rogershobbycenter.com/rc-gearing-101
Gearing in a nutshell means; If you want more speed, you install a larger pinion gear.
For more run time, reduced motor heat, or stronger acceleration, do just the opposite and install a smaller pinion.
If you’re a bit experienced, you know that messing with the spur gear works just the opposite – a smaller spur equals more speed.
Most enthusiasts also know that a single tooth change on the pinion has more impact than a single tooth change on the spur.
That covers the bare essentials about gear basics.

 

[rotauq]

Limitless:
Mod 1 with 8mm bore spur on the spool
Mod 1 with 5mm or 8mm bore pinion depending on the motor you use.

Most enthusiasts also know that a single tooth change on the pinion has more impact than a single tooth change on the spur.

This does not really apply to the limitless as we often run larger pinions and smaller spurs. Impact of a tooth change has most impact on the smallest gear

 

[Kezturbo]

It's mod 1.0. Are you by chance refering to the shaft diameter / bore?

Think I got alittle mixed up . I didn’t know if the teeth are spaced out differently if you know what I mean thanks