Limitless Limitless slow build thread.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Awesome build!
@RedondoBeachRC is a stand up guy and I enjoy running with him on weekends.
GL on finishing this bad boy!
View attachment 138471
So I know I’m jet lagged (got home after 1:00am) trying to figure out the best way to connect everything.
I have a Futaba 7PXR with R334SBS-E receiver
Futaba GYC441 gyro.
Question is: I would like to use the Telemetry feature, everything I have read confuses me more! Do I use S-BUS2 for the gyro, or Castle Telemetry Link?
Not sure if you ever got an answer to this but I have similar builds.

If not , sbus port can used in parallel so if you have a splitter, you can run rhe CC, gyro output and other telemetry using the sbus port on the receiver. I use the futaba sbus (which is 3:1)hub and i connect rhe CC tele, gyro and futaba temp sensor to the sbus.

The hub itself isn’t necessary and I’ve actually used multiple splitters to achieve the same result. You might want to consider a futaba servo which would allow you to use SR mode as well as the ability to program the servo.
 
Last edited:
Awesome build!
@RedondoBeachRC is a stand up guy and I enjoy running with him on weekends.
GL on finishing this bad boy!

Not sure if you ever got an answer to this but I have similar builds.

If not , sbus port can used in parallel so if you have a splitter, you can run rhe CC, gyro output and other telemetry using the sbus port on the revived. I use the futaba sbus (which is 3:1)hub and i connect rhe CC tele, gyro and futaba temp sensor to the sbus.

The hub itself isn’t necessary and I’ve actually used multiple splitters to achieve the same result. You might want to consider a futaba servo which would allow you to use SR mode as well as the ability to program the servo.
Thank you!
Are you looking for something to learn on and develop your understanding or something to set records with?

Learning = CNHL G+ 6k
Records = ONYX RC POWER SYSTEMS (OPS)

https://www.shadowhobbies.com/onyx-6500-148-8gw.html
Thank you for the information.
 
Installed the Scorched RC rear diff with Habao locker. Also installed the rear adjustable toe setup.

4570E712-6928-4949-9FAA-60CBB0FA8DB9.jpeg


AC963CC4-6069-4BC1-B0C6-E6017260EDED.jpeg


FB3B3127-DA32-4575-B0E5-A600827C44C5.jpeg

Worked on my crawler, waiting on the Chupacapra billet chassis to show up.
 

Attachments

  • 9BEC03D8-0955-4063-A541-5C023BBFBFF0.jpeg
    9BEC03D8-0955-4063-A541-5C023BBFBFF0.jpeg
    408.1 KB · Views: 30
  • 976D1387-82C4-42ED-9354-728B2510665C.jpeg
    976D1387-82C4-42ED-9354-728B2510665C.jpeg
    302.7 KB · Views: 28
  • FA8EED2E-DF13-4ACB-A1F1-B49BA4C0CB19.jpeg
    FA8EED2E-DF13-4ACB-A1F1-B49BA4C0CB19.jpeg
    286.8 KB · Views: 32
  • 8870E7C1-EA55-49EE-8543-CA8A9BE81C95.jpeg
    8870E7C1-EA55-49EE-8543-CA8A9BE81C95.jpeg
    276.2 KB · Views: 37
  • 98308F93-A7CA-4372-8473-582CDD613A55.jpeg
    98308F93-A7CA-4372-8473-582CDD613A55.jpeg
    531.4 KB · Views: 34
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top