Longer charging adapter needed

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Sounds like a good time to start soldering, it’s easy. Nice first project, I made some extra long balance board and xt90 charging leads so it’s easier to get everything in a lipo bag while charging...
 
I am going to get one or two of the Bat Safes but the leads are not long enough. They sell the longer balance board wires but I don't see anything for the charging leads.

What about using something like this https://www.rcplanet.com/racers-edge-4-function-to-male-4mm-bullets-charge-adapter-rce1661/ since it's just used for charging don't know how long you want it to be. You could just make your own with couple of 4mm bullet plugs and whatever wire length you want.
 
I am going to get one or two of the Bat Safes but the leads are not long enough. They sell the longer balance board wires but I don't see anything for the charging leads.
You should just buy some wire and connectors and make what you need. If you’re charging at 1C, you don’t have to go crazy with wire gauge.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top