Typhon Looking to extend my 17 mm Hex adapters on my 3s #Typhon for improved stability?

Uplift-RC

Premium Member!
Premium Member
Build Thread Contributor
Messages
717
Reaction score
996
Location
Seminole, FL
Arrma RC's
Granite, Kraton 6s, Notorious, Typhon 3s
Just wanted to make sure this is the correct part to extend my axels on my 3s Typhon for improved stability and so I can add a set of Proline MT 2.8 tires on it! Just need to confirm this is the correct part - the - Hot Racing Arrma Nero 17mm Wide Hex w/Serrated Nuts (+5mm) or the 17mm Wide Hex w/Serrated Nuts (10mm)! Let me know your thoughts @arrmafamily?

1590843076550.png
3s Typhon w: a new wing.jpeg
 
Last edited:

Yas

Well-Known Member
Messages
359
Reaction score
353
Location
UK
Arrma RC's
Notorious, Outcast 6s, Typhon 3s
Sorry I'm not sure on the part. I'm in the UK where there's fewer Hot Racing parts but what helped me was rebuilding my shocks after they were leaking heavily to begin with which made the car bouncy and roll over far too easily

You can try filling your shocks with heavier oil? Stock is 40wt. I went 70w front and 60wt rear with an extra 3mm spacer on each rear shock. It's now so much more planted... I can't roll it anymore and with next to no bounce back after jumps... night and day difference šŸ‘

You could also try lighter rear diff oil for easier cornering while on the throttle
 

fpvmiller

Don't just bash...Mod!
Premium Member
Messages
759
Reaction score
992
Arrma RC's
Infraction, Limitless, Kraton 6s, Typhon 6s

Uplift-RC

Premium Member!
Premium Member
Build Thread Contributor
Messages
717
Reaction score
996
Location
Seminole, FL
Arrma RC's
Granite, Kraton 6s, Notorious, Typhon 3s
Those won't work.

The typhon3s uses 6x12x4 outer bearing for the axle.
The nero (and other 6s models) uses 8x16x5 outer bearing for the axle.

That means the nero adapters are bigger and won't fit on the typhon3s stock axles. You have to get this https://hot-racing.com/?partnumber=ATF117XT02;c=1345 along with these https://www.arrma-rc.com/part/AR310784.
fpvmiller- many thanks!! So if I grab the Hot racing - WHEEL AXLE (2PCS) #AR310784 (ARAC9443) & the ATF117XT02 Aluminum Heavy Duty 17mm Hex Hubs 10mm Offset Arrma 1/10 4x4 it will work correct? Also, do you have a pic of they look like installed on the 3s Typhon?
 
Last edited:

fpvmiller

Don't just bash...Mod!
Premium Member
Messages
759
Reaction score
992
Arrma RC's
Infraction, Limitless, Kraton 6s, Typhon 6s
Yes the parts I (and you) listed are all you need. I don't have pics of that exact setup. I ended up widening my granite with 4s arms.
 

Edward Grant

Well-Known Member
Messages
43
Reaction score
21
Location
Cali
Arrma RC's
Granite
Just wanted to make sure this is the correct part to extend my axels on my 3s Typhon for improved stability and so I can add a set of Proline MT 2.8 tires on it! Just need to confirm this is the correct part - the - Hot Racing Arrma Nero 17mm Wide Hex w/Serrated Nuts (+5mm) or the 17mm Wide Hex w/Serrated Nuts (10mm)! Let me know your thoughts @arrmafamily?

View attachment 83307
View attachment 83309
Looking for a 3s Typhon while I wait for my Infraction back orderšŸ˜”. If anyone tired are trying to level up 6s!
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Top