Kraton M2C Kraton Chassis. Who else ordered one?

[ninadada]

If the weight of the chassis braces are of concern the Hot Racing braces were only 5 grams heavier than the stock plastic braces I replaced in the Talion v3.
https://www.arrmaforum.com/threads/what-did-you-buy-today.48/post-96516

Wow, that is a surprise. Good to know. Thanks for sharing.

 

[Pfaulk54271]

Just got back from my first hard bash, did 58mph with it on concrete, then proceeded to rip dozens of backflips off of a decent dirt mound. This rig has become a total blast, this has to be the most fun I've ever had with any rc. The rotation I get in the air is incredible, double backflips would not be difficult. Motor temps stayed around 160 during the jump session, no fans yet just yeah racing heatsink. This chassis is holding up nicely! I love this thing!

 

[Chad08]

Mine has been holding up great. I was sending it 20+ ft straight up and straight down. The chassis is still perfectly straight.

 

[Pfaulk54271]

Just got back from my first hard bash, did 58mph with it on concrete, then proceeded to rip dozens of backflips off of a decent dirt mound. This rig has become a total blast, this has to be the most fun I've ever had with any rc. The rotation I get in the air is incredible, double backflips would not be difficult. Motor temps stayed around 160 during the jump session, no fans yet just yeah racing heatsink. This chassis is holding up nicely! I love this thing!

Just nailed my first double backflip! ???

 

[Pfaulk54271]

Had to share this beauty. M2C, GKA, Markhor, Maxspeedparts, Hot racing, RPM, TBR.

 

[ninadada]

LWB Outcast with M2C Chassis

 

[cootertwo]

Pfaulk54271 nice rig, but your pinion and spur are not quite lined up with one another.

 

[bicketybam]

Pfaulk54271 nice rig, but your pinion and spur are not quite lined up with one another.

Based on what? I couldn’t tell.

 

[cootertwo]

The third picture

 

[bicketybam]

The third picture

My bad. I thought you were referring to truck in the video. NM.

 

[Pfaulk54271]

Pfaulk54271 nice rig, but your pinion and spur are not quite lined up with one another.

Good eye, looks like my red loctite didn't dry before the bash, this one somehow stripped a diff too! Will report findings...

 

[TeachMeCars]

So now that I've ordered it, and got all excited, my question is: will the stock screws work with the increased thickness of the chassis? 2mm might not seem like much, but the last thing I want is screws getting stripped or stripping hardware because they don't bite enough threads in the hardware they attach to.

Not sure if your question has been answered as I haven't read all of the thread yet, but I seem to remember seeing that the screws are kind of sunken into the chassis which may help with what you're talking about.

Edit: nevermind me, I saw someone else covered it. This is an awesome thread!

 

[Mr.Duke]

FYI....Both Kraton and SWB Outcast/Typhon/Senton chassis are back in stock along with a new product for the Arrma 6s line

tool steel hinge pins
https://www.m2cracing.com/product.sc?productId=944&categoryId=123

Arrma 20% off coupon code: M2CCOUPON

 

[bicketybam]

FWI....Both Kraton and SWB Outcast/Typhon/Senton chassis are back in stock along with a new product for the Arrma 6s line

tool steel hinge pins
https://www.m2cracing.com/product.sc?productId=944&categoryId=123

Arrma 20% off coupon code: M2CCOUPON

You’re killing me! I just ordered a chassis for my Notorious. Typhon will stay stock!

 

[Pfaulk54271]

Wheres the motor mount?!

 

[ninadada]

Wheres the motor mount?!

I hope they're not going to cost $50 each. If they're as good as anticipated, I'm going to want more than one!

 

[Jimbobjr]

The motor mount looks nice. Rich D has it in one of his videos. When I contacted m2c a while ago they mention a brace to go along with the mount that ties into the towers or chassis braces. It was not a long discription just that it was in the works...

 

[Pfaulk54271]

I saw that, saw someone else on YouTube with one as well. Eyes are definitely peeled for it, I'm holding off buying a motor mount for now because that is the one I want to run. I've been checking the site every couple days lol.

 

[Ricerocket00]

Could always Pre order the mount here

http://www.mcssl.com/mobile/ff6635b...-racing-slide-motor-mount--for-arrma-vehicles

Coupon code M2C drops it to $40 with free shipping. As far as I can tell that’s the motor mount and center diff brace... quite a good deal in my opinion.

 

[Pfaulk54271]

That is a different site compared to what I'm used to, I always order from https://www.m2cracing.com
Is that a trustworthy site?