MIP equivelant 6 Lobe (torx) driver set

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
FatCatRC

FatCatRC

FatCat Team Racing
Build Thread Contributor
Messages
2,354
Reaction score
3,182
Arrma RC's
  1. Kraton 6s
  2. Notorious
Anyone know of a good quality set of 6 lobe drivers that are like the MIP drivers in quality. I would prefer them to be able to go into a drill like the MIP set instead of seperate screw drivers.
 
FatCatRC said:
Anyone know of a good quality set of 6 lobe drivers that are like the MIP drivers in quality. I would prefer them to be able to go into a drill like the MIP set instead of seperate screw drivers.
Click to expand...
I would definitely want to know this one to....:D
 
FatCatRC said:
We are all learning each day, once you stop learning you might as well be dead.
Click to expand...
True that..LOL
Hey got a question for ya.. How tight does this have to be

20200813_201333.jpg
 
So going to ask it again as the post kinda whent another direction, but does anyone know of a set of 6 lobe(torx) drivers that are similar in quality as the MIP driver set. I bought german 6 lobe screw set for my kraton and I would like a good quality driver set. I want to be able to use them in a drill like the MIP set. If anyone knows of a set lmk.
 
FatCatRC said:
So going to ask it again as the post kinda whent another direction, but does anyone know of a set of 6 lobe(torx) drivers that are similar in quality as the MIP driver set. I bought german 6 lobe screw set for my kraton and I would like a good quality driver set. I want to be able to use them in a drill like the MIP set. If anyone knows of a set lmk.
Click to expand...
The Mip are precision ground. Torx bits can’t be manufactured that way because or their shape. Take a look at the brands wiha , and Wera, they make the best fitting out of strong material. I have a couple of each at work I use and think they are superior to cheaper ones. Couple links here as examples, might find them cheaper on amazon..
https://www.kctoolco.com/wera-34522...MI2Ofn_rex6wIVisDICh1TxQCVEAQYBSABEgLsVvD_BwE

https://www.kctoolco.com/search.php?search_query=Wiha torx&section=product
 
Jimbobjr said:
The Mip are precision ground. Torx bits can’t be manufactured that way because or their shape. Take a look at the brands wiha , and Wera, they make the best fitting out of strong material. I have a couple of each at work I use and think they are superior to cheaper ones. Couple links here as examples, might find them cheaper on amazon..
https://www.kctoolco.com/wera-34522...MI2Ofn_rex6wIVisDICh1TxQCVEAQYBSABEgLsVvD_BwE

https://www.kctoolco.com/search.php?search_query=Wiha torx&section=product
Click to expand...
I need them to go in a drill like the MIP drivers.
 
I own Wiha drivers for work and they are pretty tough. I use an impact with them for driving deck screws and they hold up way longer than store bought bits.
 
FatCatRC said:
FML just did the checkout for my MIP speed drivers. 92 bucks canadian to my door for 3 bits. Man shipping to Canada is brutal.
Click to expand...
You should be able to buy MIP at local hobby stores. I know here in Toronto, most of the shops carry them in stock. Drivers and speed bits
 
FatCatRC said:
Good call, my lhs will not have em for sure but my other "lhs" in manitoba does.
Click to expand...

Eliminator RC is my go-to place and I live in Montreal area. One tax plus free shipping over $100
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

2023
MIP Hex Driver Wrench Set .050", 1/16", 5/64", & 3/32" (SAE) same as metric 1.25mm, 1.5mm, 2mm & 2.5mm?
Replies
4
Views
759
2023
2023
Rottster
MIP For The Win!
Replies
6
Views
558
BruceRC
BruceRC
kratonwatch
Injora 5.5 box driver
Replies
9
Views
650
DLK83
DLK83
J
Tap and Drill Set
Replies
14
Views
293
NitroK
NitroK
Jamr
Beginners Basic Tools Set
Replies
2
Views
638
Jamr
Jamr
Back
Top