StephenSchandelmayer
Premium Member!
Premium Member
Rig of the Month Winner
Build Thread Contributor
I built my other typhon 6s street truck and it got me completely hooked so I had to do another. I had my fireteam decked out in m2c stuff and what not and I decided to transform that. First was the body which I discovered the proline body for the UDR (don't kill me please) fits absolutely perfectly on a Mojave chassis as far as wheelbase goes. Then came the struggle of how to mount the rear of the body since there isn't anything to mount it to. So I built some aluminum extenders and got it sitting nice. And then I built some aluminum side skirts to fill the air gap and because I wanted the side skirt look. I might eventually make the body mounts come up from the skirts instead of from the tower but it's working great now so I might not mess with it. I also had to build aluminum mounts for the front bumper and rear diffuser.
Technical stuff:
-It's running typhon front hubs, kraton rear hubs. Both have 23mm hex extenders which made the wheels fit exactly how I wanted.
-typhon arms, TLR shocks, and towers
-senton front body mounts
[email protected] wing mount for looks, no wing on it
-tp 4070 1730kv / max 5 / 6s cnhl
-23/39 gearing. (39 spool)
-m2c Mojave chassis
-m2c braces
-grp soft compound
-limitless wing
-felony front and rear bumper
-JBI rear typhon tower. Stock front tower
-hot racing center brace ends and center brace mounts
-Protek 170 tbl servo
Technical stuff:
-It's running typhon front hubs, kraton rear hubs. Both have 23mm hex extenders which made the wheels fit exactly how I wanted.
-typhon arms, TLR shocks, and towers
-senton front body mounts
[email protected] wing mount for looks, no wing on it
-tp 4070 1730kv / max 5 / 6s cnhl
-23/39 gearing. (39 spool)
-m2c Mojave chassis
-m2c braces
-grp soft compound
-limitless wing
-felony front and rear bumper
-JBI rear typhon tower. Stock front tower
-hot racing center brace ends and center brace mounts
-Protek 170 tbl servo