SOLD / FOUND Mojave EXB with upgrades M2C, basher queen, JBI and cool body. $400 plus shipping

[Armarookie43]

I have two Mojave EXB trucks. They are so damn durable that you only need one.
Parts upgraded : JBI Ackerman plate, M2C rear hinge pin block system, basher queen center brace and ESC mount , FlySky FS-GT5 6CH TX and RX, firma ESC and motor from Felony/6s trucks, lots of life left on the tires, 3D RC front and back rear bumper supports, hot Racing servo horn, brand new blue painted body that I never ran.

The only issues I see : it needs an antenna tube (if I find one at the LHS, I'll probably install it today, the chassis has wear from usage, but it's not bent, the upper and Lowe control arms have a dent on them (I hit a concrete plates by mistake). It's just cosmetic though. I will include the lower control arm. The power switch on the ESC is functional, but it lost the cover. I will include one that I cut from another firma ESC. I put back the 16t stock pinion so that temps stay in check. I also installed brand new bearings on the hubs and I haven't ran it since.

Any questions just PM me. I would probably have to go to FedEx or UPS ground to see how much they want.

 

[Robbbbbb66]

I have two Mojave EXB trucks. They are so damn durable that you only need one.
Parts upgraded : JBI Ackerman plate, M2C rear hinge pin block system, basher queen center brace and ESC mount , FlySky FS-GT5 6CH TX and RX, firma ESC and motor from Felony/6s trucks, lots of life left on the tires, 3D RC front and back rear bumper supports, hot Racing servo horn, brand new blue painted body that I never ran.

The only issues I see : it needs an antenna tube (if I find one at the LHS, I'll probably install it today, the chassis has wear from usage, but it's not bent, the upper and Lowe control arms have a dent on them (I hit a concrete plates by mistake). It's just cosmetic though. I will include the lower control arm. The power switch on the ESC is functional, but it lost the cover. I will include one that I cut from another firma ESC. I put back the 16t stock pinion so that temps stay in check. I also installed brand new bearings on the hubs and I haven't ran it since. View attachment 259182View attachment 259183View attachment 259184View attachment 259185View attachment 259186View attachment 259187View attachment 259188View attachment 259189View attachment 259190View attachment 259191View attachment 259192View attachment 259193View attachment 259194

Any questions just PM me. I would probably have to go to FedEx or UPS ground to see how much they want.

How old is it?

Not picking on it, just wondering when arrma updated the body mounts.

GLWS

 

[Armarookie43]

How old is it?

Not picking on it, just wondering when arrma updated the body mounts.

GLWS

I've had it for like 4 months or so (way longer than that! ) , but I bought it used from another forum member here. I upgraded and fixed stuff that was messed up since then. I did buy body mounts (the more resent ones), when the old ones broke. . Edit I bought it in July 26th 2021, so I've had it for way longer than I thought .

 

[Robbbbbb66]

I've had it for like 4 months or so (way longer than that! ) , but I bought it used from another forum member here. I upgraded and fixed stuff that was messed up since then. I did buy body mounts (the more resent ones), when the old ones broke. . Edit I bought it in July 26th 2021, so I've had it for way longer than I thought .

Cool, the new body mounts are definitely an upgrade from the OG ones.

 

[Armarookie43]

I forgot to mention that the fan on the ESC broke, so it needs one. I went to to the LHS, but they didn't have any in stock. It's a 35x35x10 one. It's a $10 fan. I did get an antenna tube for the Mohave though :

 

[Armarookie43]

I'm open to offers

 

[Armarookie43]

Bump. Still available. We can negotiate the shipping. Let me know

 

[Armarookie43]

I decided to keep it. Thanks