Kraton Momba monster installed

[Ole Fart51]

Installed a M/M x 2200kv in my Kraton. Took face plate off, drilled and tapped mount holes to M4. Question is, I don't have enough ports to plug in castle motor cooling fan, is there a plug adapter that will allow me to plug both fans into the same port?

 

[Vanning]

If Intigy can piggy back these 2 fans together... why not make a harness and piggy back your 2 fans together. I guess ESC fan and motor fan. I use a micro Deans in my harnesses so I can remove the fans easy. Tap into whatever you got with small black and red wire, solder and shrink tube. Then add a Deans micro connector then run the other side of the connector to your motor fan.