Typhon Motor fan Connection

[Bogis9]

Going to fit a motor fan to the Typhon do I connect to esc fan or plug straight to receiver?

 

[roondog]

I did mine to receiver.

 

[Krathead]

You can do it either way. There is plenty of power if you split off the other fan.

 

[Kingleo619]

Going to fit a motor fan to the Typhon do I connect to esc fan or plug straight to receiver?

Receiver

 

[olds97_lss]

Either works fine. I use the esc/fan with a splitter.

 

[Bogis9]

Either works fine. I use the esc/fan with a splitter.

Think I will too, I’m sick of fighting that crappy foam bit on the receiver box.

 

[Macatronus]

Either works fine. I use the esc/fan with a splitter.

can you recommend a y adapter for the yeah racing twin tornado fans?

 

[olds97_lss]

Depending on how you want to plug it in, if you want to go to the receiver, you may need a longer one than this:
https://www.amazon.com/Homyl-Female-Connector-Adapter-Splitter/dp/B07B4Z8S56

If you want to go the esc fan, you will need one of those and one of these:
https://www.amazon.com/ZRM-Extension-Airplane-Accessories-Connector/dp/B07C6NNR28

 

[GMballistic]

can you recommend a y adapter for the yeah racing twin tornado fans?

I got a really good one from Hobbyking.

 

[Macatronus]

I got a really good one from Hobbyking.

Can you link me to it please

 

[olds97_lss]

Even though these are 3-pin, they will still work with the 2-pin, you just don't use the 3rd:
https://hobbyking.com/en_us/futaba-type-compact-y-lead-15cm-5pcs.html

 

[GMballistic]

Can you link me to it please

Yes of course. Sorry for the slow reply, was busy travelling.

These are the ones I bought: https://hobbyking.com/en_us/jr-type-compact-y-lead-30cm-5pcs.html
You can also get them in a slightly shorter 15cm length: https://hobbyking.com/en_us/jr-type-compact-y-lead-15cm-5pcs.html

Hope that helps.