Motor temp

Thread starter #1

DAMO

Active Member
Messages
12
Likes
0
Arrma RC's
Typhon
Hi guys running 6s 16t pinion motor running hot any ideas to lower temps and what temps should I stay under?
 

olds97_lss

Premium Member!
Premium Member
ArrmaForum Fan
Messages
995
Likes
375
Thanks which one best suited for typhon and how to wire up?
If it's the black BLX, I think the yeah racing dual fan one works well for many. You can either splice it into the esc fan or run a Y cable out an open port of the receiver. That's what my buddy did on his talion.

I cheaped out on my outcast and went with a $10 HW cooler that uses a large lower speed single fan. Had to bend it a bit in the vice to make it fit the smaller motor it has, but it fits snug now. Seemed to do the job well enough though. Brought my temps down 25F. I used a Y cable on my esc fan to power it.
 

arrmatyphon

Well-Known Member
Messages
52
Likes
7
Arrma RC's
Typhon
Im running 16t with 6s at the large field with short grass after a full run motor is on 160f with no fan fitted. Fan its around 130f.
 

Similar threads

Top