MT410 Center Diff

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

dure16

Premium Member!
Premium Member
Build Thread Contributor
Messages
6,017
Reaction score
8,673
Location
Illinois
Arrma RC's
  1. Fireteam
  2. Infraction
  3. Limitless
  4. Kraton EXB
  5. Talion
  6. Typhon 6s
  7. Typhon TLR
I bought one of the M2C ones, it was machined very poorly and leaked.

20210124_192306.jpg

I went with m2c, it has cooling fins and holds more oil i believe.
The Tekno steel one also holds more oil than the stock plastic one.
 
Any particular reason you're looking for a metal one? Just curious, as I haven't had any issues with the stock plastic stuff (aside from the plastic spur of course, which was very soon after swapped to steel).
 
I bought one of the M2C ones, it was machined very poorly and leaked.
Thanks. That’s surprising with how good M2C stuff usually is.
Any particular reason you're looking for a metal one? Just curious, as I haven't had any issues with the stock plastic stuff (aside from the plastic spur of course, which was very soon after swapped to steel).
I’m planning a big power upgrade and want to prevent future issues. You make a good point though - maybe I’ll hold off unless there’s a problem.
 
I recently installed the steel tekno diffs in my mt410. The fitment was tighter than the stock plastics but seemed to have loosened up after a few packs. I went with the teknos as I have not heard good things about the m2s diff cups. The rest of my rig is m2c'd out..
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top