YoungDrew
Active Member
- Messages
- 12
- Reaction score
- 12
- Location
- Texas
- Arrma RC's
- BigRock
- BigRock 4x4
- Kraton EXB
- Senton 3s
- Typhon 6s
Hello!
This is my Kraton EXB build. Took a lot of inspiration from you fine folks, so thank you for that!
Did the usual drywall tape and shoe goo over the shell and a few coats of plasti dip... with the beatings my Senton took and it still is bouncing, I think she’ll hold up.
Was a PAIN finding diff fluid, but now I’ve got a stock to do a few other project’s whenever I find the time. I didn’t take any pics but when I cracked these diffs open they had like 3/4 fluid, they were however under greased, it was just slopped to a far corner of the diff case, only my pinky could reach. Did R10K C1M F30 for now until I can taker her out for a test run. Had a few issues I had to work through with Horizon Hobby, but I just needed to get the right customer service rep it seemed. ¯\_(ツ)_/¯
I will admit, there were a few times I said to myself... “I should have went with the X Maxx...” JK!
HW Max6 1650KV Combo
Radiolink RC6GS
NHX 28K RPM Fans
Powerhobby 729MBL High Voltage/Torque/Speed Servo
Yeah Racing Twin Tornado Fans
Tekno RC 18T Pinion (For Now)
Hot Racing Servo Arm 25T Link 6S
Notorious Tall Side Guards
KRATON Shock Cover
Some of the items I got from my LHS for a really good deal, I couldn’t believe it... they were beating another LHS 20 mins down the road! I just used an Amazon link for display purposes.
This is my Kraton EXB build. Took a lot of inspiration from you fine folks, so thank you for that!
Did the usual drywall tape and shoe goo over the shell and a few coats of plasti dip... with the beatings my Senton took and it still is bouncing, I think she’ll hold up.
Was a PAIN finding diff fluid, but now I’ve got a stock to do a few other project’s whenever I find the time. I didn’t take any pics but when I cracked these diffs open they had like 3/4 fluid, they were however under greased, it was just slopped to a far corner of the diff case, only my pinky could reach. Did R10K C1M F30 for now until I can taker her out for a test run. Had a few issues I had to work through with Horizon Hobby, but I just needed to get the right customer service rep it seemed. ¯\_(ツ)_/¯
I will admit, there were a few times I said to myself... “I should have went with the X Maxx...” JK!
HW Max6 1650KV Combo
Radiolink RC6GS
NHX 28K RPM Fans
Powerhobby 729MBL High Voltage/Torque/Speed Servo
Yeah Racing Twin Tornado Fans
Tekno RC 18T Pinion (For Now)
Hot Racing Servo Arm 25T Link 6S
Notorious Tall Side Guards
KRATON Shock Cover
Some of the items I got from my LHS for a really good deal, I couldn’t believe it... they were beating another LHS 20 mins down the road! I just used an Amazon link for display purposes.
