My limitless “real” 1/7 buggy conversion build....

[Typholim]

Hey guys new here... this is my limitless buggy conversion using custom 3D printed typhon parts and limitless OE parts... I’m a buggy guy that does 132ft outlaw no prep drag racing... always used a associated... losi... or X-ray dirt 1/8 buggies... I just love the way the look and perform.... when the limitless came out I just asked myself do they have a 1/7 buggy anywhere? Lol... so I made my own.... wasn’t much to do... I just took it down to a bare chassis... moved the wing in 4 inches... by cutting the OE limitless wing mount... made a new 3D printed stabilizer block for the wing... with red guide light.... and block off plate for the top.... cut the OE body down to look like a big ass typhon body.... sponsor stickers fazeek & mad scientist.... scuffed the body a little and sprayed it with clear purple candy.... the homie (mad scientist) printed me typhon replica t-Rex bumpers and took 5 centimeters out of the middle of the bumper to sit the closer to the chassis... and some cool turbo fan covers... OE clear limitless wing... TP power 2310 motor w/ castle XLX... custom XLX tune.... running two 4s 50c for 8s batteries on rubber GRPs and 6s 80c on foams.... mad scientist cap pack... mad scientist glitch buster.... mad scientist body pins.... Amad scientist 3D printed parts... and that was pretty much it... still working on something’s not all the way done... you guys have any questions on any just ask thanks for the add....!!!

 

[jondilly1974]

Your castle connectors look like they have a lot of arc damage. Do you have to swap them often? Considered ASXT150?

 

[Typholim]

yea just cause I’m running a lot of power and big cap pack... I just put these on there and haven’t had a problem... ran it in a even in dfw last weekend and got third place on its maiden runs... lol... I been using castle plugs on all my 1/8 stuff since I started racing and never had a issue... ????

Your castle connectors look like they have a lot of arc damage. Do you have to swap them often? Considered ASXT150?

 

[Notorious J]

Hey guys new here... this is my limitless buggy conversion using custom 3D printed typhon parts and limitless OE parts... I’m a buggy guy that does 132ft outlaw no prep drag racing... always used a associated... losi... or X-ray dirt 1/8 buggies... I just love the way the look and perform.... when the limitless came out I just asked myself do they have a 1/7 buggy anywhere? Lol... so I made my own.... wasn’t much to do... I just took it down to a bare chassis... moved the wing in 4 inches... by cutting the OE limitless wing mount... made a new 3D printed stabilizer block for the wing... with red guide light.... and block off plate for the top.... cut the OE body down to look like a big ass typhon body.... sponsor stickers fazeek & mad scientist.... scuffed the body a little and sprayed it with clear purple candy.... the homie (mad scientist) printed me typhon replica t-Rex bumpers and took 5 centimeters out of the middle of the bumper to sit the closer to the chassis... and some cool turbo fan covers... OE clear limitless wing... TP power 2310 motor w/ castle XLX... custom XLX tune.... running two 4s 50c for 8s batteries on rubber GRPs and 6s 80c on foams.... mad scientist cap pack... mad scientist glitch buster.... mad scientist body pins.... Amad scientist 3D printed parts... and that was pretty much it... still working on something’s not all the way done... you guys have any questions on any just ask thanks for the add....!!!

I love it! Beautifully done and a very cool spin on the Limitless platform. Definitely a show stopper and must get some "Is that a Typhon?" comments at your meets.

 

[Typholim]

Thanks!!!! not as many as you think.... lol.... most of the time I get the.... IS THAT A LIMITLESS...???? Then just show the side by side pic of mine and my friends bone stock one... lol...

I love it! Beautifully done and a very cool spin on the Limitless platform. Definitely a show stopper and must get some "Is that a Typhon?" comments at your meets.

 

[LibertyMKiii]

Welcome to the forum.
I live in north DFW

Never had an interest in drag racing, but always interested in seeing modifications and custom rc cars.