Infraction My v2 infraction build

[Goofy21792]

I know im late but better late then never

Upgrades so far

Castle mamba 1717 1650 kv motor and esc
Castle 8s cap pack

Gcrc 3 + 1 v2 hurricane fans with carbon fiber tops

Basher queen carbon fiber parts

Front splitter
Front shock tower
Front steering rack
Front top plate
Side skirts (wide)
Rear shock tower
Center rod brace

Hot racing aluminum parts

Aluminum Rear Body Mount Support
Aluminum Steering Blocks Hd Bearings
Aluminum Rear Hubs Hd Bearings
Aluminum Center Brace Front Mount
Aluminum Center Brace Rear Mount
Aluminum Front Chassis Brace Arrma
Aluminum Rear chassis Brace arrma
Aluminum Rear diffuser support

Waiting on fans

Going to custom paint a shell as well as a few more upgrades any suggestions would be appreciated thanks for looking and the in put

 

[parcou]

Well done...you have been busy. Looks good!

 

[Goofy21792]

Update git new fans and did some rewiring still need to do some touch ups but all in all it's going good

 

[Edough13]

Looks good, nice build for sure! Only suggestion I'd have is changing connections to better Qs8's or bullets over the ec5. Also a lot of guys swear on the Scorched fenders to keep rocks and crap out of the body

 

[Goofy21792]

Looks good, nice build for sure! Only suggestion I'd have is changing connections to better Qs8's or bullets over the ec5. Also a lot of guys swear on the Scorched fenders to keep rocks and crap out of the body

Yeah been thinking about different connections and the wheel Hubs and going to custom paint a shell

 

[rotauq]

PPS motor mount would be something to consider.

And the motor cooling looks a bit excessive. Adjusting the gearing to your use-age would be better imho

 

[Goofy21792]

PPS motor mount would be something to consider.

And the motor cooling looks a bit excessive. Adjusting the gearing to your use-age would be better imho

I'll look into the motor mount and my cooling might be a bit excessive where I live it's been hot and as of now I'm running stock gears but I like to bash and the last time I run it it was running hot but ill definitely look into it more I appreciate the input Thanks

 

[rotauq]

I'll look into the motor mount and my cooling might be a bit excessive where I live it's been hot and as of now I'm running stock gears but I like to bash and the last time I run it it was running hot but ill definitely look into it more I appreciate the input Thanks

If your driving it at 30C/86F + ambient temps your cooling is not excessive indeed.

How are you feeding the motor fans?(source and voltage)

 

[Goofy21792]

If your driving it at 30C/86F + ambient temps your cooling is not excessive indeed.

How are you feeding the motor fans?(source and voltage)

Temps have been 100 plus and feeling cooling with the 4s balancer port not sure about the voltage I'm running 8s

 

[SrC]

Your wheel alignment appears to be dead on accurate, telling by the wear on those used Hoons. (in the pix)
It almost looks like you perfectly shaved and matched them.
Nice rig.

 

[rotauq]

Temps have been 100 plus and feeling cooling with the 4s balancer port not sure about the voltage I'm running 8s

100's, so 3 fans is a valid choice

Running 3 of those 0.5A+ from your balance cables might be a bit much. Pulling 1.5-3A continuous from 3 or 4 cells will unbalance the 2x4S battery setup.
I would consider taking your power from the main 8S leads and use a tiny voltage regulator to scale it down to 12v.