2morrow Muggins
Active Member
Hey guys...I made the mistake while upgrading my front bumper on my Kraton 4S BLX of not putting back the 2 screws that hold the gearbox in place. After a small bump the whole front end was hanging off as if it had a broken neck lol...After watching 3287514375610357 videos i got the courage to just take it all apart and realized that my chassis just flat out broke/snapped. So I ordered a new chassis so i can transfer everything over. I cleaned out the gears took all of the broken plastic pieces out of the gears...lubed it all up again with losi black grease. I decided to upgrade my Servo...Servo Saver...and Servo Mount...all from HotRacing. I noticed that the stock receiver box is also the servo mount all one piece. Plus the the screws don't line up...1-is there a piece that I'm missing to install the servo mount?...2- do i need a different receiver box...3- do i use the metal servo horn that came with the servo saver or the metal one that come with the new Servo? 4- servo saver comes with 3 little black inserts are they all the same size? which one do i use?
Parts in question:
1- ATF48SH02 Fixed Link Steering Servo saver Arrma 1/10 4WD 3s 4s
2- Hot Racing AON24M02 Aluminum Steering Servo Mount Arrma Kraton
3- ZOSKAY Waterproof High Torque Metal Gear Standard Digital Servo 25KG/0.13S 6.8V for 1/8 1/10 RC Cars (Control Angle 270)
Parts in question:
1- ATF48SH02 Fixed Link Steering Servo saver Arrma 1/10 4WD 3s 4s
2- Hot Racing AON24M02 Aluminum Steering Servo Mount Arrma Kraton
3- ZOSKAY Waterproof High Torque Metal Gear Standard Digital Servo 25KG/0.13S 6.8V for 1/8 1/10 RC Cars (Control Angle 270)