Need help!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Ole Fart51

Active Member
Messages
421
Reaction score
371
Location
Louisiana
Arrma RC's
  1. Nero
  2. Talion
im looking for 124mm dog bone (drive shaft) for 1/8 scale monster truck. Been building a truck with parts from several trucks and now I need a odd size shaft. Kraton shaft too short, Avalanche too long. Any ideas?
 
im looking for 124mm dog bone (drive shaft) for 1/8 scale monster truck. Been building a truck with parts from several trucks and now I need a odd size shaft. Kraton shaft too short, Avalanche too long. Any ideas?

...hmmmmm..
what diameter?..5mm?..I'm guessing you are talking about the one from the center diff to the rear?...

can you post a pic?....some pics?....I got several ideas...just want to take a look...to see if my mind is on track...
 
...hmmmmm..
what diameter?..5mm?..I'm guessing you are talking about the one from the center diff to the rear?...

can you post a pic?....some pics?....I got several ideas...just want to take a look...to see if my mind is on track...
This is a pic of one I extended to test fit. Fits perfect but don't think I should use it. Not balanced
 

Attachments

  • IMG_6688.JPG
    IMG_6688.JPG
    246.7 KB · Views: 51
oooookkkkkk...


found some good leads...but you got several options...not bad either way...
1)... if you are willing to sacrifice 4mm of length..by shimming something?...moving a few things in your design if possible?...you can use 5th scale hpi baja aftermarket parts. ..they have a 120 mm dogbone setup ... larger stronger cups are also avail...etc...
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPGP6

and here is my search link for more options like daves..
https://www.google.com/search?ie=UT...e=android-browser&q=hpi+baja+drivesaft+length

2)...a custom shop that makes aftermarket for hpi (and many others)...and most of these driveshafts are produced by these guys anyway...and would most likely make a slightly longer one for you is...company called fast lane machine...and they currently make shafts for the baja up to an inch longer than stock...and they also produce bigger stronger blah blah...lots of parts

http://www.fastlanemachine.net/products.php?cat=Baja+5B

http://www.fastlanemachine.net/proddetail.php?prod=FLM90013

hope this helps...do it dude...
 
Last edited:
oooookkkkkk...


found some good leads...but you got several options...not bad either way...
1)... if you are willing to sacrifice 4mm of length..by shimming something?...moving a few things in your design if possible?...you can use 5th scale hpi baja aftermarket parts. ..they have a 120 mm dogbone setup ... larger stronger cups are also avail...etc...
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPGP6

and here is my search link for more options like daves..
https://www.google.com/search?ie=UT...e=android-browser&q=hpi+baja+drivesaft+length

2)...a custom shop that makes aftermarket for hpi (and many others)...and most of these driveshafts are produced by these guys anyway...and would most likely make a slightly longer one for you is...company called fast lane machine...and they currently make shafts for the baja up to an inch longer than stock...and they also produce bigger stronger blah blah...lots of parts

http://www.fastlanemachine.net/products.php?cat=Baja+5B

http://www.fastlanemachine.net/proddetail.php?prod=FLM90013

hope this helps...do it dude...
You the Man!! Thanks

You the Man!! Thanks
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top