Granite New Arrma granite 3s

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Purepower88

Fairly New Member
Messages
8
Reaction score
2
Guys got the new armma granite some how the controller is only working on the side switch letter s a and b the throttle on works on those button s ??? No clue why can't figure why the normal throttle stick not working. Any ideas help hope I explained properly. The name on controller is spektrum SLT 3
 
Guys got the new armma granite some how the controller is only working on the side switch letter s a and b the throttle on works on those button s ??? No clue why can't figure why the normal throttle stick not working. Any ideas help hope I explained properly. The name on controller is spektrum SLT 3
Check that the ESC and servo are plugged into the reciever correctly. The reciever is in the black plastic box underneath the ESC. Channel (1) is for your servo/steering and channel (2) is for the ESC/throttle and aux channel is either empty or has a fan plugged into it. Also make sure the black wire is towards the outside of the reciever when plugged in.
 
Check that the ESC and servo are plugged into the reciever correctly. The reciever is in the black plastic box underneath the ESC. Channel (1) is for your servo/steering and channel (2) is for the ESC/throttle and aux channel is either empty or has a fan plugged into it. Also make sure the black wire is towards the outside of the reciever when plugged in.
Yes everything is like that. Just the throttle works with this button on the side of the controller instead of the normal throttle lever.
This button the throttle works on ?!! Not the lever ??
 

Attachments

  • PXL_20210724_000029629~2.jpg
    PXL_20210724_000029629~2.jpg
    394.5 KB · Views: 31
Last edited:
Check that the ESC and servo are plugged into the reciever correctly. The reciever is in the black plastic box underneath the ESC. Channel (1) is for your servo/steering and channel (2) is for the ESC/throttle and aux channel is either empty or has a fan plugged into it. Also make sure the black wire is towards the outside of the reciever when plugged in.
Hey you were right thanks so much. I had the rear fan plugged in the throttle and ESC in aux
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top